• En
  • 繁
  • 简
HKIC SPDC CITAC ZCP BIM CISVP CITF MiC Awards

  • About CITF
    Background
    Chairman Message
    Governance
    Fund Video
  • Funding Scope
    Technology Adoption
    BIM
    BIM Adoption
    BIM Training Course (Classroom-bound training)
    BIM Project-based Coaching
    BIM Viewer Collaborative Training
    ACT
    General Application
    Pioneering Application
    Robotic Welding
    MiC
    Specialist MiC Consultant
    MiC Specific Constrction Plants
    MiC Modules
    MiC Project Implementation
    Entry of MiC systems to the Buildings Department (BD)’s Lists
    STB
    Manpower Development
    Non local Enrichment Course for Students
    Non local Training / Visits for Practitioners
    International Conferences in Hong Kong
    Local Collaborative Courses
  • Pre-Approved Lists
    Pre Approved Lists
    Application to Pre-Approved Lists
  • Application
    Application Procedures
    Terms and Conditions
    Application Reference Material
    Guide to Application
    Application Framework
    Sample Quotation Form
    List of Approved Projects
  • Experience / Knowledge Sharing
    PowerPoint Sharing and Other Material
    CITF Digest
    FAQ
    Videos
  • What‘s News
    Event List
  • Contact us
    CIC Address
    CITF Address
    Advisory Station
  • About CITF
    • Background
    • Chairman Message
    • Governance
    • Fund Video
  • Funding Scope
    • Technology Adoption
      • BIM
        • BIM Adoption
        • BIM Training Course (Classroom-bound training)
        • BIM Project-based Coaching
        • BIM Viewer Collaborative Training
      • ACT
        • General Application
        • Pioneering Application
        • Robotic Welding
      • MiC
        • Specialist MiC Consultant
        • MiC Specific Constrction Plants
        • MiC Modules
        • MiC Project Implementation
        • Entry of MiC systems to the Buildings Department (BD)’s Lists
      • STB
    • Manpower Development
      • Non local Enrichment Course for Students
      • Non local Training / Visits for Practitioners
      • International Conferences in Hong Kong
      • Local Collaborative Courses
  • Pre-Approved Lists
    • Pre Approved Lists
    • Application to Pre-Approved Lists
  • Application
    • Application Procedures
    • Terms and Conditions
    • Application Reference Material
      • Guide to Application
      • Application Framework
      • Sample Quotation Form
    • List of Approved Projects
  • Experience / Knowledge Sharing
    • PowerPoint Sharing and Other Material
    • CITF Digest
    • FAQ
    • Videos
  • What‘s News
    • Event List
  • Contact us
    • CIC Address
    • CITF Address
    • Advisory Station
  • SEBSIDIARIES & PROJECTS

    HKIC SPDC CITAC ZCP BIM CISVP CITF MiC Awards
    • En
    • 繁
    • 简
  • Home
  • Pre-Approved Lists
  • BIM Software

  • BIM Training Course

  • Technologies

  • Type of Technology Product Type Code Distribution Channel Product Descriptions Reference Photo
    Sensors and IoT Movement Sensors PA18-001 Wuxi Wisen Innovation Co. Ltd. / Digital G Limited
    Tel: 9202 5335
    WISENMESHNET® System
    In comparison with traditional wired measurement, the design of system is principled as (a) ultra low powered; (b) completely wireless mesh communication system; (c) minimum in size; (d) broadly compatible with different type of sensors, i.e, turn traditional sensors into self powered, wireless, automated wireless sensor network. It replaces traditional wired measurement in the midst of complicated excavation works which could be vulnerable and the repair for damaged cables are dangerous and the cost of the loss of real-time monitoring data is huge.
    Digitalisation 3D reality simulation / Data management
    (CDE-related)
    PA18-002 Geosys Hong Kong Ltd
    Tel: 6198 5234 / +86 13088880388
    Geosys VR3D data management system
    Geosys VR3D data management system support the visualisation of 3D GIS and BIM data in one integrated viewer for users with 2D and 3D measurement and analysis functions. Web based 3D Measurement tools such as distance, path, angle, height, Volume, Section are provided.
    Cloud and server-based system allows users to open the application without software installation and maintenance for different end-user's PCs

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Advanced Tools and Equipment Laser Scanner PA18-003 Yau Lee Construction Co. Ltd / Global Virtual Design and Construction Ltd
    Tel: 3199 0388
    Trimble Tx5 3D Laser Scanner
    The laser scanning and BIM modelling enables collection of large quantity of 3-dimensional measurements in a quick and accurate way. It can speed up the site measurement and save time. It also facilitate designers to carry out design. It helps to carry out the offsite fabrication based on point cloud or BIM modelling data.
    Advanced Tools and Equipment Exhaust Air Treatment Device PA18-004 Hong Kong Productivity Council
    Tel: 2788 6352
    AFT Exhaust After Treatment System for Non-road Mobile Machinery
    The intelligent control system enables effective regeneration control and reduces energy consumption.
    The operating cost is low by using the silicon carbide ceramic wall flow filter.
    System operation is fully automatic and simple. This product reduces pollution and improves environment.

    Legend: 14
    Advanced Tools and Equipment Drone PA18-005 D-Reality Consultancy Limited
    Tel: 5625 2312
    ELIOS
    The product is a safe drones for surveying and photo/ video taking in inaccessible places. It is designed for remote inspection (including infrared thermographic survey) and exploration of the hazardous places. Its wireless communication system offers a robust digital, bi-directional, long range signal transmission, including video and data. It can avoid sending people to dangerous and confined space to conduct site inspection.
    Advanced Tools and Equipment Exoskeleton PA18-006 Shun Hing Systems Integration Co. Ltd.
    Tel: 2439 8393
    Powered Wear
    Model-Y
    The product is a wearable robot that alleviates burden to the waist when lifting heavy objects. When a worker is about to pick up a heavy object, the product, controlled by motion sensors, provides assistance to the worker, helps reduce strain and improves safety.

    Legend: 15
    Product Information
    Video
    Sensors and IoT Safety Monitoring System PA18-007 ATAL Technologies Limited
    Tel: 9488 0410
    Construction Stage Tunnel Access Control System (TACS)
    The system, incorporated RFID Technology, 3G telecommunication, custom-designed software is used for real-time safety monitoring of on-site human resources and incident management.

    Legend: 14, 15
    Video
    Digitalisation 3D reality simulation / Data management PA18-008 Advanced Design and Manufacturing Pty Ltd
    Tel: +61 894795575 / +61 401678727
    3DM Analyst Mine Mapping Suite
    The product is a non-contact remote sensing tool, which allows structural mapping for geotechnical analysis of a rock mass using an automatically-generated, detailed and accurate 3D model from data of sensors. It could see multiple surfaces at once and map structures that may be too large to see. Users could stay away from hazardous areas, hence reducing their risk.
    Sensors and IoT 3D reality simulation / Data management
    (CDE-related)
    PA18-009 Temporarily suspended - vendor out of contact Altizure.com (3D mapping. Modelling and publishing cloud system platform)
    This product enables reconstruction and transformation of 3D model with automated photo captured by different means e.g. cell phones, drones etc., enhancing off-site construction process monitoring, easy sharing of models for project redevelopment. Geo-referenced applications add value to BIM, GIS and AEC applications.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)

    Legend: 14
    Advanced Construction Material Waterproofing Material PA18-010 Growtech Limited
    Tel: 2305 5222
    Growseal Nano-brush Coat
    This waterproofing material incorporated the nanoparticles features to enhance the physical properties in order to compete with other materials to suit the real application in buildings under humid weather. Its application on damp surface can save construction time on external area under humid weather in Hong Kong. It extends the service lift of coating and reduce the cost of renovation and maintenance of the buildings.

    Legend: 14
    Video
    Advanced Tools and Equipment Energy Saving Sign Board PA18-011 Waste & Environmental Technologies Ltd.
    Tel: 3708 0100
    Solar-powered Message Board Trailer (MBT)
    Solar-powered signage and message board which allows off-site updating of messages and signage for construction site. This product leads to better management and control of site traffics, reduces the risk of accidents, reduces pollution, improves environment, more durable than standard sign board and can withstand rough weather conditions.
    Product Information
    Video
    Automation and Robotics Automatic Bar Cutting Machine PA18-012 Temporarily suspended - vendor out of contact Construction Cutting Line - Short
    Model: DT-1818C-S
    The traditional manual rebar cutting and bending method has been used for more than 40 years. It required intensive skilled labour force performing repeated working sequences and incurred high physical injury accident rate.
    The proposed automatic machinery is an innovative positive move of the cutting and bending procedures. The automatic machineries can shear and cut different kinds of rebar in a systematic and sequential order. Advantages of the product over traditional way includes: (i) Redundant works are done automatically; (ii) Heavy rebars are placed automatically in place; (iii) Simple Operation. (Less skills required); (iv) Accuracy and quality standard are improved; (v) Accidental injury significantly reduced; (vi) Less dependent on skilled labour
    Automation and Robotics Automatic Bar Cutting Machine PA18-013 Temporarily suspended - vendor out of contact Construction Cutting Line - Long
    Model: DT-1818C-L
    The traditional manual rebar cutting and bending method has been used for more than 40 years. It required intensive skilled labour force performing repeated working sequences and incurred high physical injury accident rate.
    The proposed automatic machinery is an innovative positive move of the cutting and bending procedures. The automatic machineries can shear and cut different kinds of rebar in a systematic and sequential order. Advantages of the product over traditional way includes: (i) Redundant works are done automatically; (ii) Heavy rebars are placed automatically in place; (iii) Simple Operation. (Less skills required); (iv) Accuracy and quality standard are improved; (v) Accidental injury significantly reduced; (vi) Less dependent on skilled labour
    Automation and Robotics Automatic Bar Cutting Machine PA18-014 Temporarily suspended - vendor out of contact 150T Shear Line
    Model: DT-2018
    The traditional manual rebar cutting and bending method has been used for more than 40 years. It required intensive skilled labour force performing repeated working sequences and incurred high physical injury accident rate.
    The proposed automatic machinery is an innovative positive move of the cutting and bending procedures. The automatic machineries can shear, cut, segregate and bend different kinds of rebar in a systematic and sequential order. Advantages of the product over traditional way includes: (i) Redundant works are done automatically; (ii) Heavy rebars are placed automatically in place; (iii) Simple Operation. (Less skills required); (iv) Accuracy and quality standard are improved; (v) Accidental injury significantly reduced; (vi) Less dependent on skilled labour
    Automation and Robotics Automatic Bar Cutting Machine PA18-015 Temporarily suspended - vendor out of contact 300T Shear Line
    Model: DT-3210
    The traditional manual rebar cutting and bending method has been used for more than 40 years. It required intensive skilled labour force performing repeated working sequences and incurred high physical injury accident rate.
    The proposed automatic machinery is an innovative positive move of the cutting and bending procedures. The automatic machineries can shear and cut different kinds of rebar in a systematic and sequential order. Advantages of the product over traditional way includes: (i) Redundant works are done automatically; (ii) Heavy rebars are placed automatically in place; (iii) Simple Operation. (Less skills required); (iv) Accuracy and quality standard are improved; (v) Accidental injury significantly reduced; (vi) Less dependent on skilled labour
    Automation and Robotics Automatic Bar Bending Machine PA18-016 Temporarily suspended - vendor out of contact Y25 Bending Machine (2 Benders)
    Model: DT-BD2-8
    The traditional manual rebar cutting and bending method has been used for more than 40 years. It required intensive skilled labour force performing repeated working sequences and incurred high physical injury accident rate.
    The proposed automatic machinery is an innovative positive move of the cutting and bending procedures. The automatic machineries can shear, cut, segregate and bend different kinds of rebar in a systematic and sequential order. Advantages of the product over traditional way includes: (i) Redundant works are done automatically; (ii) Heavy rebars are placed automatically in place; (iii) Simple Operation. (Less skills required); (iv) Accuracy and quality standard are improved; (v) Accidental injury significantly reduced; (vi) Less dependent on skilled labour
    Automation and Robotics Automatic Bar Bending Machine PA18-017 Temporarily suspended - vendor out of contact Y32 Bending Machine (2 Benders)
    Model: DT-BD2-10
    The traditional manual rebar cutting and bending method has been used for more than 40 years. It required intensive skilled labour force performing repeated working sequences and incurred high physical injury accident rate.
    The proposed automatic machinery is an innovative positive move of the cutting and bending procedures. The automatic machineries can shear, cut, segregate and bend different kinds of rebar in a systematic and sequential order. Advantages of the product over traditional way includes: (i) Redundant works are done automatically; (ii) Heavy rebars are placed automatically in place; (iii) Simple Operation. (Less skills required); (iv) Accuracy and quality standard are improved; (v) Accidental injury significantly reduced; (vi) Less dependent on skilled labour
    Automation and Robotics Automatic Bar Bending Machine PA18-018 Temporarily suspended - vendor out of contact Y25 Auto Bending Machine (5 Benders)
    Model: DT-B5-8
    The traditional manual rebar cutting and bending method has been used for more than 40 years. It required intensive skilled labour force performing repeated working sequences and incurred high physical injury accident rate.
    The proposed automatic machinery is an innovative positive move of the cutting and bending procedures. The automatic machineries can shear, cut, segregate and bend different kinds of rebar in a systematic and sequential order. Advantages of the product over traditional way includes: (i) Redundant works are done automatically; (ii) Heavy rebars are placed automatically in place; (iii) Simple Operation. (Less skills required); (iv) Accuracy and quality standard are improved; (v) Accidental injury significantly reduced; (vi) Less dependent on skilled labour
    Automation and Robotics Automatic Bar Bending Machine PA18-019 Temporarily suspended - vendor out of contact Y16 Auto Bending Equipment (2 Benders)
    Model: DT-B235A
    The traditional manual rebar cutting and bending method has been used for more than 40 years. It required intensive skilled labour force performing repeated working sequences and incurred high physical injury accident rate.
    The proposed automatic machinery is an innovative positive move of the cutting and bending procedures. The automatic machineries can shear, cut, segregate and bend different kinds of rebar in a systematic and sequential order. Advantages of the product over traditional way includes: (i) Redundant works are done automatically; (ii) Heavy rebars are placed automatically in place; (iii) Simple Operation. (Less skills required); (iv) Accuracy and quality standard are improved; (v) Accidental injury significantly reduced; (vi) Less dependent on skilled labour
    Automation and Robotics Automatic Bar Bending Machine PA18-020 Temporarily suspended - vendor out of contact Y16 Auto Stirrup Machine
    Model: DT-BD16L
    The traditional manual rebar cutting and bending method has been used for more than 40 years. It required intensive skilled labour force performing repeated working sequences and incurred high physical injury accident rate.
    The proposed automatic machinery is an innovative positive move of the cutting and bending procedures. The automatic machineries can shear, cut, segregate and bend different kinds of rebar in a systematic and sequential order. Advantages of the product over traditional way includes: (i) Redundant works are done automatically; (ii) Heavy rebars are placed automatically in place; (iii) Simple Operation. (Less skills required); (iv) Accuracy and quality standard are improved; (v) Accidental injury significantly reduced; (vi) Less dependent on skilled labour
    Automation and Robotics Automatic Bar Bending Machine PA18-021 Temporarily suspended - vendor out of contact Automatic Stirrup Bender
    Model: WGZ12B, WGZ16, WGZ16F
    The traditional manual rebar cutting and bending method has been used for more than 40 years. It required intensive skilled labour force performing repeat working sequences and incurred high physical injury accident rate.
    The proposed automatic machinery is an innovative positive move of the cutting and bending procedures. The automatic machineries can shear, cut, segregate and bend different kinds of rebar in a systematic and sequential order. Advantages of the product over traditional way includes: (i) Redundant works are done automatically; (ii) Heavy rebars are placed automatically in place; (iii) Simple Operation. (Less skills required); (iv) Accuracy and quality standard are improved; (v) Accidental injury significantly reduced; (vi) Less dependent on skilled labour
    Automation and Robotics Automatic Bar Bending Machine PA18-022 Temporarily suspended - vendor out of contact Bending Centre
    Model: Robot 60
    The traditional manual rebar cutting and bending method has been used for more than 40 years. It required intensive skilled labour force performing repeat working sequences and incurred high physical injury accident rate.
    The proposed automatic machinery is an innovative positive move of the cutting and bending procedures. The automatic machineries can shear, cut, segregate and bend different kinds of rebar in a systematic and sequential order. Advantages of the product over traditional way includes: (i) Redundant works are done automatically; (ii) Heavy rebars are placed automatically in place; (iii) Simple Operation. (Less skills required); (iv) Accuracy and quality standard are improved; (v) Accidental injury significantly reduced; (vi) Less dependent on skilled labour
    Automation and Robotics Automatic Bar Cutting Machine PA18-023 Temporarily suspended - vendor out of contact Shear Line
    Model: XQ120, GJW1240, GJW150B
    The traditional manual rebar cutting and bending method has been used for more than 40 years. It required intensive skilled labour force performing repeat working sequences and incurred high physical injury accident rate.
    The proposed automatic machinery is an innovative positive move of the cutting and bending procedures. The automatic machineries can shear, cut, segregate and bend different kinds of rebar in a systematic and sequential order. Advantages of the product over traditional way includes: (i) Redundant works are done automatically; (ii) Heavy rebars are placed automatically in place; (iii) Simple Operation. (Less skills required); (iv) Accuracy and quality standard are improved; (v) Accidental injury significantly reduced; (vi) Less dependent on skilled labour
    Automation and Robotics Automatic Bar Bending Machine PA18-024 Temporarily suspended - vendor out of contact Bending Centre
    Model: G2L32, G2W50
    The traditional manual rebar cutting and bending method has been used for more than 40 years. It required intensive skilled labour force performing repeat working sequences and incurred high physical injury accident rate.
    The proposed automatic machinery is an innovative positive move of the cutting and bending procedures. The automatic machineries can shear, cut, segregate and bend different kinds of rebar in a systematic and sequential order. Advantages of the product over traditional way includes: (i) Redundant works are done automatically; (ii) Heavy rebars are placed automatically in place; (iii) Simple Operation. (Less skills required); (iv) Accuracy and quality standard are improved; (v) Accidental injury significantly reduced; (vi) Less dependent on skilled labour
    Automation and Robotics Pile Cage Machine PA18-025 Temporarily suspended - vendor out of contact Pilemaster III
    Pilemaster III pile cage machine will weld automatically not only round pile cages, but the welding of square, rectangular and triangular cages. The welding is precise by a flexible welding head and through an integrated bar support, which follows the curve of the polygonal cage easily.
    This new generation of machine comes with the new ring discs system to allow the production of individual cage diameters. The control unit will check the quality of the actual welding and in case of failure.
    Automation and Robotics Automatic Bar Bending Machine PA18-026 Temporarily suspended - vendor out of contact PBX-Polybend
    The feed system of the Polybend machine features a motorized rollertype straightening unit and a water-cooled electric servo drive, ensures output with a minimum of maintenance and dimensional accuracy of the products.
    The motorized straightening roll adjustment in the roller-type straightening units, adapted to wire diameter and quality, results in short change over times and easy operation.
    The automatic stirrup bending machine is controlled by CNC system and can accomplish straighten, bend and cut coil wire and straight bars automatically instead of 20-30 workers. This greatly reduces labour and save cost.
    Automation and Robotics Automatic Bar Cutting Machine PA18-027 Temporarily suspended - vendor out of contact Fully Automatic Cutting Machine for Steel Rebar
    The automatic cutting machine with computerized control can be easily operated by less staff compare to traditional cutting machine. Also, the machine is equipped with automatic dividing function by magnetic device and divider which will save operators from the fatigue process. With better accuracy in the cutting process, work output can be much improved which resulting a less material usage and time saving.
    Digitalisation 3D reality simulation / Data management PA18-029 Star Vision Ltd
    Tel: 2897 0975
    SVMap
    Image is generated with the integration of LiDAR and photogrammetry (UAV & close range) technology and can be used to establish as-built BIM (existing BIM) for construction monitoring. Application includes but not limited to as-built footing/wall location checking, grid line checking, excavation volume checking, construction progress monitoring, environmental monitoring, life-cycle monitoring and maintenance, etc.
    Compared with as-built checking using traditional land surveying method, the new technology is tested 5 times faster. The product is in 3D big data format, which contains at least 100,000 times more data amount as compared to traditional data collection method.

    Legend: 14
    Digitalisation 3D Design and Simulation PA18-030 Intelligent CAD/CAM Technology Ltd
    Tel: 3921 2300
    SOLIDWORKS
    SOLIDWORKS is a CAD package which enables the creation of complex designs with the parametric capabilities to facilitate design changes at any stage of the design process.
    SOLIDWORKS comes with a complete suite of tools to develop accurate designs that can be leveraged across planning, equipment design, layout, fabrication, and construction. Also quickly create photorealistic renderings and fully-detailed fabrication drawings for structural designs, mechanical equipment designs, mechanical system HVAC, electrical cable layouts, and piping systems. Test and explore design alternatives using SOLIDWORKS Simulation to optimize the designs against project specifications and customer requirements.
    Product Information
    Video
    Sensors and IoT Safety Monitoring System PA18-032 VHSoft Technologies Co. Ltd
    Tel: 2619 8034
    Visual Intelligence Safety Compliance Monitor (VISCMon) system
    The VISCMon system comprises with the sensor and sensing technologies. In collaboration with artificial intelligence technologies and the latest telecommunication technologies, it provides a solution to meet the needs on safety. Specialized cameras operate like the CCTV system when monitoring work area. The cameras monitor workers and check if the required safety standards are met. Once the required safety gear is not detected, a message will be sent to site safety officer via telecommunication network.

    Legend: 15
    Product Information
    Video
    Digitalisation Project Management Software
    (DWSS-related)
    PA18-033 VHSoft Technologies Co. Ltd
    Tel: 2836 0099
    VHSmart
    VHSmart is a cloud base field management platform. With the engagement of Cloud Platform and Advance Mobile Technology, VHSmartTH provides an integrated construction life cycle solution which facilitate end-user from access control, field safety management, progress monitoring, quality control, asset management, material tracking & inventory in every stage.

    (Note: This product has certain DWSS functions which the vendor shall be inquired for details.)
    Video
    Digitalisation Project Management Software
    (DWSS-related)
    PA18-034 Build.IT Limited
    Tel: 2752 7508
    Digital Record of Work (dRoW)
    Digital Record of Work (dRoW) is a site record information system. Featuring a user-friendly, versatile interface and a flat learning curve, dRoW is the system for construction projects with its compatibiliity with a wide variety of site records, which includes Document, NEC Contract, Drawing, Design Management Systems, Safety, QMS, tests registry etc

    (Note: This product has certain DWSS functions which the vendor shall be inquired for details.)
    Product Information
    Video
    Digitalisation Project Management Software
    (DWSS-related)
    PA18-035 Spatial Technology Ltd.
    Tel: 2636 6102
    Novade
    Novade is a full range of solutions for your project – Manage Quality, Safety, Logistics, Maintenance, Workforce & Activity. The Mobileready Platform Includes Key Functionalitie:- - Forms & Checklists - Drawing Mark-ups - Digital Signatures - Map Locations - QR Codes & NFC Tags - Picture Annotations

    (Note: This product has certain DWSS functions which the vendor shall be inquired for details.)
    Sensors and IoT Concrete Strength Maturity Sensor PA18-036 Digital G Limited
    Tel: 9202 5335
    The Converge System
    The System is a hardware and software product that enables wireless monitoring of concrete temperature and compressive strength (when the correct calibration data is provided for a particular mix design). The System is made up of five parts: 1. a temperature Sensor; 2. the “Node” to transmit sensor data; 3. the “Repeater”, extends range; 4. the “Hub”, a 3G cellular gateway sends data to the Converge Platform; and 5. The Converge Platform
    Product Information
    Video
    Advanced Construction Material Concrete Slab Substituting Material PA18-037 MDM Group Inc. Ltd.
    Tel: 3955 0892
    MatrixDeck Panel Configuration
    Models: A200 - A850
    MatrixDeck System is a green technology. It is essentially a structural floor system that provides a 150kg per square meter of carbon emission saving when compared to conventional building system. It is a high performance reinforced concrete floor slab that allows greater column spacing and minimizes the material usage of concrete and steel reinforcement when compared to conventional structural floor system.
    Video
    Sensors and IoT Ground Investigation Data Management PA18-038 Temporarily suspended - no vendor contact HoleBASE SI
    HoleBASE SI can convert ground investigation AGS raw data into BIM model, which was a unique geo-technology management system integrated with GIS, geo-sections, data triggers and would be able to couple with Microsoft Excel. These additional features extend the system as a planning and analysis tool, which would be useful for geo-engineering project management.
    Advanced Tools and Equipment Torque Wrench PA18-039 Hilti (Hong Kong) Limited
    Tel: 8228 8118
    Adaptive Torque System (AT System)
    Adaptive Torque ready tools are equipped with the sensors and onboard intelligence to confirm if a Hilti anchor has been set according to ETA and ICC-ESR approvals.
    The tool can be connected to a computer to instantly generate an installation report, offering inspectors and specifiers a higher confidence that the work has been carried out exactly as specified.
    Product Information
    Video
    Automation and Robotics Welding Robot PA19-001 Welbot Technology Limited
    Tel: 9225 9449
    Adaptive Robotic Welder
    The welding robotic control software could auto generate the weldpath, perform 3D welding weave, complex, non-straight welding path. It can set up the robot task within 2 minutes. The robot can provide standard welding quality to improve the productivity by replacing experienced welder on site.
    The weight of six-axis robot arm is light (11-28kg) with (0.5-1.3m) reach radius provide flexible mobility requirement for construction industry.

    Legend: 14
    Video
    Automation and Robotics Demolition Robot PA19-002 C. Crossfield & Co., Ltd.
    Tel: 2753 8500
    Brokk Demolition Robots
    Model: B60, B70, B110, B170, B200, B300, B500, B800S
    Brokk is a remote controlled demolition robot which can outperform the existing excavators five times as its size. The weight and size of Brokk facilitate its accessibility in locations like narrow spaces and stairs. Through remote control, even the smallest model of Brokk machines B60 can replace manual method of 3 to 5 workers with jackhammers. Workers’ safety can be enhanced as they are not exposed to harmful vibrations and other hidden dangers on site. Moreover, Brokk robots are electric driven with no fumes exhausted like conventional excavators, thereby promoting environmental protection.

    Legend: 15
    Video
    Automation and Robotics Automatic Bar Bending Machine PA19-003 Temporarily suspended - vendor out of contact Bending Centre
    Model: G5L25
    The traditional manual rebar cutting and bending method has been used for more than 40 years. It required intensive skilled labour force performing repeat working sequences and incurred high physical injury accident rate.
    The proposed automatic machinery is an innovative positive move of the cutting and bending procedures. The automatic machineries can shear, cut, segregate and bend different kinds of rebar in a systematic and sequential order. Advantages of the product over traditional way includes: (i) Redundant works are done automatically; (ii) Heavy rebars are placed automatically in place; (iii) Simple Operation. (Less skills required); (iv) Accuracy and quality standard are improved; (v) Accidental injury significantly reduced; (vi) Less dependent on skilled labour
    Sensors and IoT Force, Underground Water Level, Inclination, and Environmental Monitoring Sensor PA19-004 LR Construction Technologies Ltd
    Tel: 2137 0877
    Automated IoT Construction Monitoring Devices and Monitoring System
    IoT monitoring devices measure force, underground water level, inclination, and also environmental quantities such as temperature, humidity, barometric pressure, and air pollutant concentrations. Readings can be automatically measured at 1-minute intervals round-the-clock regardless of weather conditions, and are stored on the cloud. The monitoring system's multi-platform user interface allows users to view readings in real time. Instantaneous risk analysis can also be carried out and warnings can be instantly issued according to user configured safety thresholds.
    Video
    Advanced Tools and Equipment Laser Scanner PA19-005 Sigma Mascot (HK) Limited
    Tel: 3563 8841
    FARO Focus 3D Laser Scanner
    Model: S350, Plus S350
    The Laser scanning and BIM modelling enables collection of large quantity of 3-dimensional measurements in a quick and accurate way. It can speed up the site measurement and save time. It also facilitate designers to carry out design. It helps to carry out the offsite fabrication based on BIM modelling data.

    Product Information
    Video
    Sensors and IoT Vibration and Tilting Monitoring System PA19-006 Global Sensing Solutions Ltd.
    Tel: 9087 1215
    GSS wireless sensors
    GSS 3G and Vibration Sensor (3GV), GSS Wireless Mesh Dongle (WMD), GSS Wireless Mesh Manager with 3G Gateway (WMM3G), GSS Wireless Tilt & Vibration Sensor (T&V)
    GSS wireless sensors offer a complete vibration and/or tilting monitoring solution that has been designed to deploy on construction and blast sites. It can reduce labour cost, save time and cost on installation and maintenance, ensure staff safety and provide real-time alerts.

    Legend: 14
    Automation and Robotics Automatic Bar Bending Machine PA19-007 Schnell Machinery Tianjin
    Tel: 022-26981667
    Automatic Cutting and Bending Machine for Steel Rebar
    Model: Smart 13 Coil
    The automatic bending machine with computerized control can be easily operated by less staff compared to traditional bending machine. The machine can process deformed bar in coil (DBIC) of sizes: 6mm to 8mm diameter (double strand) and 6mm to 13mm (single strand). It can also produce accurate in shapes and measurement.
    Automation and Robotics Automatic Bar Bending Machine PA19-008 Schnell Machinery Tianjin
    Tel: 022-26981667
    Automatic Cutting and Bending Machine for Steel Rebar
    Model: Smart 13 Bar
    The automatic bending machine with computerized control can be easily operated by less staff compared to traditional cutting machine. The machine can process straight bar sizes: 6mm to 8mm diameter (double strand) and 6mm to 13mm (single strand). It can also produce accurate in shapes especially doing small stirrups.
    Automation and Robotics Automatic Bar Bending Machine PA19-009 Schnell Machinery Tianjin
    Tel: 022-26981667
    Automatic Bending Machine for Steel Rebar
    Model: Robo Smart 45
    The automatic bending machine equips with rollers which can move and bend coil easily. It can easily produce accurate “L”, “C” and “double C” shapes. With computerised control, the machine only requires 1 staff for operation.
    Digitalisation 3D Reality Simulation / Data Management
    (CDE-related)
    PA19-010 Esri China (Hong Kong) Limited
    Tel: 3768 5962
    ArcGIS Desktop
    Type: Standard, Advanced, Data Interoperability
    ArcGIS Desktop Standard provides the tools and environment for map creation and interactive visualisation, multiuser editing, and advanced data management capabilities. It integrates GIS information with BIM models to enhance productivity, collaboration with different trades, improve decision making and design quality.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Product Information
    Video
    Automation and Robotics Transportation Machine PA19-011 O-matic Intelligent Robot Limited
    Tel: 3705 2998
    Transbot
    A wireless control battery-operated Universal Service Vehicle capable of carrying construction materials/tools moving around construction sites with different terrain conditions. Transbot can replace manual handling operation in delivery and unloading of heavy items. It can reduce safety hazards to labours and increase work efficiency.

    Legend: 14, 15
    Video
    Automation and Robotics Hydro-demolition Robot PA19-012 China Road and Bridge Corporation
    Tel: 6483 6280
    Aquajet Aqua Cutter 710H
    This is a diesel driven, wireless controlled ultra-high pressure hydrodemolition robot for concrete demolition. It can accurately remove concrete with steel reinforcement undamaged and it provides excellent bond for repair materials in rough and irregular surface. Moreover, it can reduce the vibrations created to the surrounding structure during operation and significantly reduce transmitted sound through the structure. The robot helps minimise injuries.

    Legend: 15
    Video
    Sensors and IoT Movement Sensors PA19-013 Utter Berry
    Tel: +44 07411166491
    UtterBerry
    UtterBerry is a wireless sensor used for displacement monitoring on construction sites with high accuracy and autonomy. A group of sensors can form a mesh network and relay data between each other which are supported by a base station providing connectivity to the internet or a local network in order to get real-time access to the sensor data. It can reduce manpower for manual measurement and surveying which improves productivity and safety risk exposure.
    Advanced Tools and Equipment Laser Scanner PA19-014 MYBIM Ltd
    Tel: 2806 2699
    Paracosm PX-80 3D Laser Scanner
    PX-80 is a hand-held laser scanner capable of full 6-DoF positional tracking. It uses proprietary SLAM technology which is a fusion of LiDAR, colour imagery and Inertial Measurement Unit (IMU) data. It enhances BIM modelling in collecting large quantity of 3-dimensional measurements which facilitates designers to carry out design, and surveyors to conduct 3D digital survey.
    Video
    Automation and Robotics Automatic Bar Bending Machine PA19-015 Temporarily suspended - vendor out of contact Bi-directional automatic stirrup bender from coil
    Model: Prima 13
    The automatic bi-directional stirrup bender from deformed bar in coil (DBIC) for the production of stirrups and cut-to-size bars using wires up to 13mm diameter (single strand 12mm diameter and double strand 10mm diameter). With computerised control, the machine only requires 1 staff for operation.
    Automation and Robotics Automatic Bar Bending Machine PA19-016 Temporarily suspended - vendor out of contact Bi-directional automatic stirrup bender from coil
    Model: Coil 16
    The automatic bi-directional stirrup bender from deformed bar in coil (DBIC) for the production of stirrups and cut-to-size bars using wires up to 16mm diameter (single strand 6mm diameter and double strand 10mm & 12mm diameter). With computerised control, the machine only requires 1 staff for operation.
    Advanced Tools and Equipment Concealed Services Scanner PA19-017 Hilti (Hong Kong) Limited
    Tel: 8228 8118
    PS1000 Radar Type Concrete Scanning Machine with Display
    PS1000 is used for detecting embedded materials (not only rebar) inside concrete before drilling. It utilises radar technology to detect up to depth 300mm of concrete with accuracy +/-10mm to prevent clashing while drilling. PS1000 also includes a table display which can display the scanned image to achieve accurate measurement.
    Product Information
    Video
    Advanced Tools and Equipment Laser Scanner PA19-018 Sigma Mascot (HK) Limited
    Tel: 3563 8841
    FARO Focus 3D Laser Scanner
    Model: S150, Plus S150
    The laser scanning and BIM modelling enables collection of large quantity of 3-dimensional measurements in a quick and accurate way. It can speed up the site measurement and save time. It also facilitate designers to carry out design. It helps to carry out the offsite fabrication based on BIM modelling data.
    Product Information
    Video
    Advanced Tools and Equipment Laser Scanner PA19-019 Sigma Mascot (HK) Limited
    Tel: 3563 8841
    FARO Focus S70 3D Laser Scanner
    The laser scanning and BIM modelling enables collection of large quantity of 3-dimensional measurements in a quick and accurate way. It can speed up the site measurement and save time. It also facilitate designers to carry out design. It helps to carry out the offsite fabrication based on BIM modelling data.
    Product Information
    Video
    Advanced Tools and Equipment Laser Scanner PA19-020 Sigma Mascot (HK) Limited
    Tel: 3563 8841
    FARO Focus M70 3D Laser Scanner
    The laser scanning and BIM modelling enables collection of large quantity of 3-dimensional measurements in a quick and accurate way. It can speed up the site measurement and save time. It also facilitate designers to carry out design. It helps to carry out the offsite fabrication based on BIM modelling data.
    Product Information
    Video
    Automation and Robotics Automatic Bar Bending Machine PA19-021 Temporarily suspended - vendor out of contact High-speed automatic stirrup machine
    Model: Multibend 16 Bar
    The automatic stirrup bending machine is used for high-speed production of all types of polygonal stirrups and hoops utilising stock length bars as feedstock.
    The machine works one single bar for diameter 10mm, 12mm and 16mm (two bars for diameter 10mm and 12mm). It only requires 1 staff to operate this computerised machine.
    Advanced Tools and Equipment Noise Barrier PA19-022 Acoustics Innovation Limited
    Tel: 6298 1533
    SilentUP Retractable Noise Barrier
    SilentUP is a standalone retractable noise barrier for construction noise control upto 7m high. It does not require concrete foundation but water barriers only and the entire structure can be installed by manpower without using any machine. SilentUP employs an Automatic Wind Load Relieving Mechanism which reduces the structure loading requirement significantly. It improves the productivity and safety of work. It can also be reusable and thereby reduce waste.
    Automation and Robotics Stone Slab Scanning & Cutting Machine PA19-023 Temporarily suspended - vendor out of contact Informatization Production 3P Solution (Scanner, Planning, Software, Intelligent Cutting Machine) for Marble & Stone
    Model: KTS2200-1S
    The product has not only the traditional bridge cutting machine, but also new functions such as AI cutter presetting, automatic labelling, moving slab with suckers. By using the built-in software, 3 types of cutting plans namely Automatic Optimization, Picture Planning and Artificial Planning could be made in advance with the maximum-yield principle. The machine will cut the marble / stone slabs according to the cutting plan automatically by one-key operation.
    Digitalisation Project Management Software
    (DWSS-related)
    PA19-024 SnagR Ltd.
    Tel: 6055 4002
    SnagR
    SnagR is a cloud-based quality management system, designed to monitor the progress of complex projects. The system can capture onsite data, automate reporting, visualise the process and analyse data.

    (Note: This product has certain DWSS functions which the vendor shall be inquired for details.)
    Digitalisation Asset Management Software PA19-025 Hilti (Hong Kong) Limited
    Tel: 8228 8118
    ON!Track
    ON!Track is a digitalised asset management solution designed for construction industry. It uses cloud-based server for information storage and can be retrieved or updated with two interfaces which are web portal and mobile app.
    User can attach a robust 2-D barcode /QR code on the asset for unique identification purpose and the information can be retrieved by scanning. Asset information include picture, documents, location, purchase information, warranty expiration date and scheduled services.
    Video
    Advanced Tools and Equipment Non-destructive Testing Device for Steel Wires PA19-026 Mak Kee International HK Ltd.
    Tel: 2396 4107
    Non-Destructive Testing Device for Steel Wire Rope
    Non-Destructive Testing is a portable device for steel wire rope inspection. It uses magnetic flux leakage examination method to detect and diagnose the deterioration of steel wire rope, including both obvious defects and imperceptible changes. It is suitable for all kinds of wire rope applications.
    Advanced Tools and Equipment Digital Layout Tools PA19-027 Hilti (Hong Kong) Limited
    Tel: 8228 8118
    PLT300 Advanced Layout
    PLT 300 Advanced Layout is a digital layout tools to replace conventional layout process by means of tape measure and chalk line. It virtually eliminates a learning curve as no levelling is required and the Hilti technology allows easy automatic station setup and hence enhances productivity.
    Product Information
    Video
    Advanced Tools and Equipment Paint Spraying Machine PA19-028 Smooth Investment Co. Ltd
    Tel: 2395 5297
    Wagner Heavy Coating Airless Paint Spraying Machine
    Model: HC950, HC 970
    The machine is for spraying of heavy and high viscosity coating or even lime plaster. It can directly draw paint material from the container/ bucket and enable the single operator to spray large area quickly with the long nozzle gun tube, which reduce the need for and the associated risk of high level work in particular at standard storey height of around 3m.
    Advanced Tools and Equipment Wall Saw Machine PA19-029 Hilti (Hong Kong) Limited
    Tel: 8228 8118
    DST 20-CA Wall Saw
    This wall saw automates the cutting process. It could be remote-controlled at distances away from the work area by wireless control. Information on the cutting depth displayed on the remote controller screen helps improve safety. With simple setting of job parameters, it can also improve cutting efficiency and accuracy in the cutting process.

    Legend: 15
    Product Information
    Video
    Automation and Robotics Automatic Wall Plastering Machine PA19-030 Paul Y. Engineering (H.K.) Limited
    Tel: 2831 8338
    Automatic Wall Plastering Machine TUPO 8 E-Control Plus 1000
    The product is a remote-controlled automatic wall plastering machine which could apply cement sand plaster automatically to wall upto 5m high (380V 3 Phase model) or upto 3m high (220V 1 Phase model).
    This product eliminates the need for working at height, improves quality by standardizing the plastering process automatically, allows wider surface of application comparing with manual plastering thereby increasing productivity.

    Legend: 15
    Sensors and IoT Safety Monitoring System PA19-031 Beeinventor Limited
    Tel: 9757 2952
    Dasloop IoT Smart Helmet with Cloud Based Management Platform
    This system could track and locate workers in both outdoor and indoor enviroment. Information can be visualised in 3D BIM model in the cloud based management platform. Real-time monitoring could improve the efficiency in site supervision and management. The heartbeat rate and body temperature sensors could provide instant alert through SMS if abnormal readings are detected. The accelerometer sensor could detect accidental fall and motionless conditions so that quick actions could be taken. Users could also press the panic button to call for help in emergency. Collison warning could also be given to workers to minimise injuries.

    Legend: 14, 15
    Video
    Advanced Tools and Equipment Laser Scanner PA19-032 YSF Corporation Limited
    Tel: 8109 8368
    Topcon GLS-2000 Series Laser Scanner
    Model: GLS-2000S, GLS-2000M, GLS-2000L
    The laser scanning and BIM modelling enables collection of large quantity of 3-dimensional measurements in a quick and accurate way. It can speed up the site measurement and save time. It also facilitate designers to carry out design. It helps to carry out the offsite fabrication based on BIM modelling data.
    Digitalisation Project Management Software
    (DWSS-related)
    PA19-033 Letsapp Limited
    Tel: 5225 4679
    FieldConnect v3.0
    FieldConnect is a cloud-based workflow management system application for the construction industry. It runs on computers and mobile devices. FieldConnect makes use of latest mobile technologies, including photo capacity, realtime push technology, team chatroom and GPS information. It provides multi-media information, Geo-data and AI-based analysis/projection via big data.

    (Note: This product has certain DWSS functions which the vendor shall be inquired for details.)
    Product Information
    Video
    Digitalisation Project Management Software
    (DWSS-related)
    PA19-034 Digital G Limited
    Tel: 9202 5335
    Inspecto
    Inspecto is a digital solution for site inspection process among contractors, consultants and clients. It is a mobile App which enables the performing of all Request for Inspection and Survey Checklist process tasks including RISC status monitoring, on-spot inspection, result endorsement etc.

    (Note: This product has certain DWSS functions which the vendor shall be inquired for details.)
    Automation and Robotics Water Spraying Robot PA19-035 O-matic Intelligent Robot Limited
    Tel: 3705 2998
    Water Spraying Robot
    The robot is designed for water spraying test suitable for indoor leak test. Workers only need to set the test trajectory according to the requirement of the site. The robot can spray water according to the set trajectory. By using the built-in HD camera, user can monitor and record the entire water test process. User can also realtime monitor multiple robots through internal 4G router.
    Automation and Robotics Drilling Robot PA19-036 O-matic Intelligent Robot Limited
    Tel: 3705 2998
    Drillbot
    This is a 6-axis collaborative robot with a drilling tool. It will move the drilling tool to drill holes on desired spots with high accuracy and efficiency.
    Video
    Automation and Robotics Welding Robot PA19-037 O-matic Intelligent Robot Limited
    Tel: 3705 2998
    Mobile Welding Robot
    Mobile welding robot is a robot equipped with a mobile robot platform (include a 6-axis collaborative robot), welder and water cooler. It can maneuver on construction site to handle welding jobs according to the programmed trajectory accurately.
    Automation and Robotics Paint Spraying Robot PA19-038 O-matic Intelligent Robot Limited
    Tel: 3705 2998
    Paintbot
    A 6-axis collaborative robot with a spraying tool attached to an universal service vehicle (USV) can maneuver at construction sites to handle painting job. The USV with wireless remote control moves the robot into close proximity to painting areas. The robot can then move the spraying tool to spray paint following the programmed trajectory. With the help of Paintbot, workers are kept away from potentially harmful inhalants.

    Legend: 15
    Advanced Tools and Equipment Working Platform PA19-039 Modern (Int’l) Access & Scaffolding Ltd
    Tel: 2745 6011
    Electric Scissor Lift
    Model: ALMAC BIBI 1090-BL ELC
    The product can be driven and working on slope or uneven and rough terrain. It can save much time for erection and dismantling of traditional scaffold work platform on inclined surface which has to be shifted zone by zone. Compared to traditional scissor platform which can only work on flat and even surface with a maximum of 3-5 degree inclination, it can provide a safe condition for worker even in slopes up to 15 degrees or uneven terrian.

    Legend: 15
    Product Information
    Video
    Advanced Tools and Equipment Working Platform PA19-040 Modern (Int’l) Access & Scaffolding Ltd
    Tel: 2745 6011
    Diesel Scissor Lift
    Model: ALMAC BIBI 1090-BL EVO
    The product can be driven and working on slope or uneven and rough terrain. It can save much time for erection and dismantling of traditional scaffold work platform on inclined surface which has to be shifted zone by zone. Compared to traditional scissor platform which can only work on flat and even surface with a maximum of 3-5 degree inclination, it can provide a safe condition for worker even in slopes up to 15 degrees or uneven terrian.

    Legend: 15
    Product Information
    Video
    Advanced Tools and Equipment Working Platform PA19-041 Modern (Int’l) Access & Scaffolding Ltd
    Tel: 2745 6011
    Diesel / Electric Boom Lift
    Model: ALMAC JIBBI 1250 EVO, 1250 ELC, 1670 EVO, 1670 LTH
    This product is an articulated working platform which has a wider coverage than scissor platforms enabling the worker to reach working areas with access difficulties.
    The product can be driven and working on slope or uneven and rough terrain. It can save much time for erection and dismantling of traditional scaffold work platform on inclined surface which has to be shifted zone by zone. Compared to traditional product which can only work on flat and even surface with a maximum of 3-5 degree inclination, it can provide a safe condition for worker even in slopes up to 15 degrees or uneven terrian.

    Legend: 15
    Product Information
    Video
    Digitalisation 3D Reality Simulation / Data Management
    (CDE-related)
    PA19-042 Chain Technology Development Co., Ltd.
    Tel: 3746 3788
    CHAIN Hybrid Reality Platform
    Hybrid Reality Platform (HRP) is a unified cloud management platform for managing 3D models such as BIM, Reality Meshes, Point Clouds and other 3D formats altogether in a single web platform. Apart from providing 3D visualisation to users, the platform also provides functions for manipulating 3D model and optimizing the spatial information such as integrating 2D file management with 3D models, 4D progress management and simulation, asset management, facility management.

    Legend: 14 (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Video
    Digitalisation 3D Reality Simulation / Data Management
    (CDE-related)
    PA19-043 Professional Construction Strategies Group Limited
    Tel: +44 2086804120
    GeoConnect+ Common Data Environment
    The GeoConnect+ Common Data Environment enables digitisation of estates, capturing asset/project data and maintains this golden thread of information throughout the asset lifecycle. It is able to plan, manage and schedule construction project in one 4D environment. It can also integrate with BIM model and CAD software and visualise image in 3D and VR.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Sensors and IoT Noise, Dust and Vibration Monitoring System PA19-044 Novox Limited
    Tel: 2690 9881
    iSmartBuild Real-time Monitoring System
    iSmartBuild Monitoring System aims at providing cost-effective real-time noise, dust and vibration monitoring platform. It minimises the manpower and boots the capability of professional environment monitoring works during construction period and under required situation. Moreover, warnings in the form of SMS / email alert can be instantly issued according to user-configured safety thresholds.
    Sensors and IoT Safety Monitoring System PA19-045 Customindz Limited
    Tel: 9125 3390
    Artificial Intelligence Computer Vision Cloud viAct
    This product is a one-stop artificial intelligence and video surveillance platform for equipment, safety and quality detection. This product uses API and graphical user interface, and can perform custom detection and predefined detection. Predefined detection includes detecting: (i) people and facial and body attributes, (ii) objects and (iii) actions.

    Legend: 14, 15
    Video
    Digitalisation Project Management Software
    (DWSS-related)
    PA19-046 Infotronic Technology Ltd.
    Tel: 9106 7601
    InfoSMART™ xTrack - Quality, Progress and Defect Management System
    InfoSMART™ xTrack provides real-time site progress and inspection recording, and can auto-generate instant report to facilitate quality control, progress and defect management throughout the whole construction period by using IoT and big data technologies. The system operates with cloud-based platform and allows real-time logging archive.

    (Note: This product has certain DWSS functions which the vendor shall be inquired for details.)

    Legend: 14
    Video
    Sensors and IoT Safety Monitoring System PA19-047 Infotronic Technology Ltd.
    Tel: 9106 7601
    InfoSMART™ Attend – Real Time Manpower Attendance in-site Record System
    InfoSMART™ Attend is a real-time construction worker activity tracking and management system. This product not only provides workers’ gate-in/gate-out records via worker-card reader and biometric device at turnstiles, but also enables real-time visibility and tracking of workers in sites, provide reliable attendance record to reduce disputes over wages and injuries, and generate workers' work/trade report for fleet management.

    Legend: 14
    Video
    Advanced Tools and Equipment Laser Scanner PA20-001 Leica Geosystems Limited
    Tel: 2161 3880
    Leica BLK 360 Laser Scanner
    Leica BLK360 Laser Scanner can capture photo with full-colour panoramic images overlaid on a high-accuracy point cloud. Simple to use with just the single push of the on button, this product is the smallest and lightest of its kind. User who can operate a tablet to capture photo around them with high resolution 3D panoramic images.
    Advanced Tools and Equipment Laser Scanner PA20-002 Leica Geosystems Limited
    Tel: 2161 3880
    Leica 3D Laser Scanner
    Model nos.: RTC360, RTC360 LT
    This is a target-less laser scanner which enables collection of large quantity of 3-dimensional measurements in a quick and accurate way. It can speed up the site measurement and save time. It also facilitate designers to carry out design. It helps to carry out the offsite fabrication based on BIM modelling data.
    Digitalisation 3D Reality Simulation / Data Management
    (CDE-related)
    PA20-003 AFM Limited
    Tel: 3103 1481
    ARCHIBUS Extending BIM to Enterprise Asset Management
    ARCHIBUS provides a centralized platform and integrated solution for enterprise asset management and facility management. It is designed to seamlessly integrate data with other systems such as BIM, CAD, IoT and more.
    In order to update and collect BIM information during construction period, ARCHIBUS Enterprise Asset Management BIM Extensions can provide graphical bi-directional link to Revit, enabling an easy and incremental approach for adopt and transition into BIM technology.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Video
    Automation and Robotics Drill Rig PA20-004 Sandvik Hongkong Limited
    Tel: 2963 4231
    SANDVIK Top Hammer Drill Rig
    Model: DC130Ri, DC410R
    It is a fully remote-controlled, hydraulic and self-propelled drilling unit. It usually applies to foundation drilling, road cutting, trenching, and line drilling in dimensional stone quarries. This product can monitor the drilling straightness and measure the incline angle of the drill hole through TIMi aligning system.
    Video
    Automation and Robotics Automatic Bar Cutting Machine PA20-005
    (former PA18-028)
    Machinery Expert Limited / Chun Chin Engineering Co. Ltd
    Tel: 2483 1289 / 6016 6020
    Y50 Automated Rebar Cutting Equipment
    Model: CM-180T
    This product adopts a powerful hydraulic system specialised for Y10-Y50 rebar processing industry which is suitable for construction site or factories. Measuring, cutting, detaching and placing could be handled by just 1 operator. It helps to save manpower, enhance accuracy and quality standard, reduce wastage, improve site safety, thus boosting productivity.
    Product Information
    Video
    Advanced Tools and Equipment Lifting Crane PA20-006 Plant & Company Limited
    Tel: 2736 0223
    FASSI Hydraulic Truck Crane
    Model: F820RA.2.28 xhe-dynamic, F1150RA.2.28 xhe-dynamic
    The truck mounted lifting crane which consists of full-time enabled safe load indicator complies with EN 12999 standard. It can continuously monitor and indicate the Safe Working Load at different outrigger extensions or load lifting conditions of the crane on a real-time basis. It could give safety alert and stop the crane when overload occurs unless it returns to the safe position.

    Legend: 15
    Video
    Advanced Tools and Equipment Surveying Camera PA20-007 Leica Geosystems Limited
    Tel: 2161 3880
    Leica BLK3D
    Leica BLK 3D Site Measurement Camera provides real time, in-picture 3D measurement. It allows user to create images that contain precise three-dimensional measurement, which enhance the documentation for architecture, engineering and construction project.
    Product Information
    Video
    Advanced Tools and Equipment Digital Layout Tools PA20-008 Leica Geosystems Limited
    Tel: 2161 3880
    Leica iCON iCR80 Robotic Total Station
    Leica iCON iCR80 Robotic Total Station provides layout efficiency with reliable, simple and automatic set up procedure and flexible handling of fully rendered 3D design models in the field. It can layout more points per day due to ATRplus, lock and re-lock technology which speeds up aiming of targets. It is especially useful in congested sites with many distractions, such as reflections, machines and people moving around.
    Automation and Robotics Drill Rig PA20-009 Epiroc Hong Kong Limited
    Tel: 2488 0103
    FlexiROC T20R
    This product is a radio-remote-controlled drill rig for surface and underground construction operations such as foundation drilling, trenching and tunnelling. The main features of this product lie on its hydraulic rollover, extensive boom reach, compact size, three different feed lengths and wireless control. With these features, this machine can perform 360° drilling in all directions with extended coverage. Only simple set-ups are required to convert the product into multiple holes, optimising the use in small area.
    Product Information
    Video
    Digitalisation 3D Reality Simulation / Data Management
    (CDE-related)
    PA20-010 isBIM Limited
    Tel: 2382 8380
    Jarvis CDE
    Jarvis CDE is a Common Data Environment platform based on BS1192. It serves as the central repository and digital knowledge process unit. It stores all BIM data, provides developed functions as well as API to connect to other software products. It uses BIM models, drawings and data from JARVIS for online collaboration work.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Product Information
    Video
    Automation and Robotics Concrete Mixer Truck Washing Machine PA20-011 Link Global Hong Kong Limited
    Tel: 6622 1043
    DrumBlaster Build Up Control Technology (BCT)
    This machine provides unique technology for cleaning concrete residual in concrete containing truck by automatic robotic arm to replace conventional manual labour cleaning method. This product enables washing of residual fresh concrete with a self-rotating water jet nozzle while the engine could be switched off and the drum is not rotating.
    Product Information
    Video
    Advanced Tools and Equipment Unmanned Vessel for Under Water Surveying PA20-012 South Instruments Technology Limited
    Tel: 9293 3993
    Unmanned Surface Vessel
    Model: SOUTH SL20
    The unmanned surface vessel of SOUTH SL20 is equipped with sounder and other equipment which can carry out water surveys without operators going out to the sea. SOUTH SL20 can automatically switch from the smart mode to the manual mode according to the pre-set line operation, intelligent identification and barriers avoidance and other functions. A lot of time is saved in measuring the data obtained.
    Video
    Sensors and IoT Concrete Strength Maturity Sensor PA20-013 Gear Up Materials Limited
    Tel: 6196 3369
    SMARTROCK - Wireless temperature and strength sensor for concrete
    The sensors can estimate the early-age and compressive strength of in-place concrete based on the maturity method, according to ASTM C1074. The goal of these sensors is to measure the temperature of concrete in real-time and correlate this data to the concrete’s strength. Temperature data is collected by the sensor and uploaded to any smart device within an app using a wireless connection. This information is then used to calculate the compressive strength of the in-situ concrete element based on the maturity equation that is set up in the app.
    Video
    Sensors and IoT Movement Sensors PA20-014 South Instruments Technology Limited
    Tel: 9293 3993
    Happy Monitoring System
    Model nos.: Happy GEM-X11, Happy GEM-X20
    Happy Monitoring collects real time settlement data. It collects data through GPS, uploads and stores it in the cloud server and uses its artificial intelligence computing system to increase the GPS centimeter accuracy to millimeter accuracy level. It only needs to extract data through the Internet and has a wide monitoring range, all-weather application, installation only requires Plug-and-play, saving time and increasing productivity during the construction process.
    Video
    Advanced Tools and Equipment Position Surveying Tool PA20-015 Strobus (Far East) Limited
    Tel: 2690 3773
    Nilamtec T2F Rugged Android Tablet with Centimeter Level GNSS Positioning Accuracy
    The Nilamtec T2F is a handheld device with GNSS positioning capability connected to professional external GNSS antenna to provide high precision for surveying work. It provides real time output from the device. The data can be shared with Android engineering software, eg BIM app in real time basis.
    Advanced Tools and Equipment Laser Scanner PA20-016 A & P Instrument Company Limited
    Tel: 2755 6578
    Green Valley International LiBackpack C50 Laser Scanner System
    Green Valley International LiBackpack C50 Laser Scanner System is a SLAM-based (simultaneous localization and mapping based) mobile 3D laser scanning system which integrates Lidar (an optional post-processing software) and 360° imaging technology to produce camera photos and 3D point clouds. This product is functional in both hand-held and backpack modes, can apply in both indoor and outdoor, and can be remote-controlled with any wireless/wired devices.
    Advanced Tools and Equipment Digital Layout Tools PA20-017 YSF Corporation Limited
    Tel: 8109 8368
    Topcon Layout Navigator LN-100
    Topcon Layout Navigator LN-100 is a 3D positioning and layout tool designed for construction layout and topographic measurement. It provides functions of automatic levelling and target tracking, high speed position update, using smart phone or tablet for measurement control and data transfer, wide working coverage and guide light.
    Automation and Robotics Glass Manoeuvring Equipment PA20-018 Robinson Equipment Limited
    Tel: 2543 7008
    K. Schulten Glass Robot
    Model nos.: KS180, KS280, KS350, KS400, KS600, KS800, KS1000, KS1400, KS Robotlift 250/7
    K. Schulten Glass Robot is applicable to curtain wall, shop-front glass panel and special shape façade installation. The traditional mono-rail method requires working from outside of the buildings or manual-lifting with hand tools, chain block and lorry crane which affects the outdoor operation and building sequence. With multi-angle glass manipulator, suction cups and remote-control function, glass robot can shorten the pane installation time, involve less manpower and enable indoor and multi-angle pane lifting and installation.
    Video
    Automation and Robotics Material Lifting Machine PA20-019 Robinson Equipment Limited
    Tel: 2543 7008
    Wienold-LIFTE Material Lift
    Model nos.: GML-C/600, GML-C/800, MFC750
    Wienold-LIFTE Material Lifts are counterbalanced and electrically driven with remote control for raising loads for glass and material installation. Compared with traditional material lifting method, this product is compact and equipped with different Safe Working Loads and lifting heights. It also eliminates the need for using eye bolts and chain blocks, thus improving productivity and safety in material lifting.

    Legend: 15
    Video
    Sensors and IoT Safety Monitoring System PA20-020 EBSL
    Tel: 2345 1882
    BLAXTAIR Pedestrian / Machinery Anti-collision Camera
    The BLAXTAIR® System allows users to set detection zone and provides audible alarm and flashing signals on the driver’s screen if there are pedestrians or objects within the set zone. A monitor installed in the cabin provides continuous footage captured by the sensor head. It can ensure the safety of the pedestrians nearby the work site.

    Legend: 15
    Product Information
    Video
    Digitalisation 3D Reality Simulation / Data Management
    (CDE-related)
    PA20-021 Varadise Limited
    Tel: 2312 6880
    Varadise Twin
    Varadise Twin is a Digital Twin platform that serves as Digital Construction Management Hub. All construction progress and data will link with BIM for monitoring and collaboration. With built-in BIM analytic engine, engineers will receive notifications if progress is delayed or manufacturing progress is behind.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)

    Legend: 14
    Video
    Automation and Robotics Paint Spraying Robot PA20-022 Transforma Robotics Ptd Ltd
    Tel: +65 65702669
    PICTOBOT
    PICTOBOT is an intelligent mobile robot that autonomously scans, plans and paints interior of buildings. Workers can avoid the need for working at height and are kept away from potentially harmful inhalants.

    Legend: 15
    Automation and Robotics Inspection Robot PA20-023 Transforma Robotics Ptd Ltd
    Tel: +65 65702669
    QUICABOT
    QUICABOT is a mobile robot for Building Interior Finishing Inspection and Assessment. It collects data and scans the interior finishing and automatically generates an assessment of different kinds of defects. The data can be uploaded into a cloud or BIM for reference and data analysis.
    Digitalisation Project Management Software
    (DWSS-related)
    PA20-024 Cerebro Strategy Limited
    Tel: 2272 3670
    SIMple
    SIMple is an innovative app making site management simple and sustainable. It digitalises three major aspects of site management including site diary, site inspection checklist (Request for Inspection / Survey Check Form) and site safety management records.

    (Note: This product has certain DWSS functions which the vendor shall be inquired for details.)
    Sensors and IoT Safety Monitoring System PA20-025 SmarTone Mobile Communications Limited
    Tel: 3128 2467
    SmartWorks
    SmartWorks is an integrated platform to enhance construction workers’ health, safety and operational efficiency. The platform incorporates five modules to promote and manage worksite safety, namely Smart Helmet for worker’s real-time condition sensoring, SmartHealth Station for workers’ health surveillance checking, Environmental Station for environmental monitoring, danger rader concerning of Safety Triggering System and Dump Truck Management.

    Legend: 15
    Product Information
    Video
    Advanced Tools and Equipment Exoskeleton PA20-026 PolyU Technology & Consultancy Company Limited
    Tel: 3400 2711
    BIAVE – Bio-Inspired Anti-Vibration Exoskeleton
    Bio-Inspired Anti-Vibration Exoskeleton (BIAVE) is designed for workers using handheld breakers to prevent hand-arm occupational diseases. It is a passive, non-linear stiffness and damping system which can significantly suppress the vibration transmissibility from vibrating tools to operators without affecting efficiency nor increasing handling complexity.

    Legend: 15
    Product Information
    Video
    Advanced Tools and Equipment Formwork System PA20-027 Ming Tai Construction Engineering Company Limited
    Tel: 2866 4878
    Ming Tai Smart Formwork Aluminum Tableform System
    The product is a system formwork which is a combination of formwork, safe working platform and propping. It could be easily assembled and the assembled module of formwork could be repeatedly used in typical floors or standard concrete elements on site without the need to erect again to enhance productivity.
    Video
    Advanced Tools and Equipment Noise Barrier PA20-028 Novox Limited / APAC Building Acoustics Limited
    Tel: 2690 9881 / 2786 5900
    Gudi Sonic Armour SA Series Acoustic Blankets
    Series no.: SA27, SA29, SA31
    Gudi Sonic Armour SA Series Acoustic Blankets is a tailor-made sound insulation barrier for piling work and different types of Powered Mechanical Equipment. It does not have a fixed formation of installation allowing flexibility in installation and dismantling. It could be designed to hang on frames, scaffold by magnet or hooks and fasteners for fast installation.

    Legend: 14
    Advanced Tools and Equipment Crusher PA20-029 K B Machinery Company Limited
    Tel: 2674 4184
    MB Crusher Buckets
    Model: BF120 (2019 version), BF135.8, BF150.10, BF90.3 S4
    MB Crusher Buckets are designed to fit to compatible excavators which can directly crush construction material or waste such as rock and wood into small particles. Compared to traditional methods such as breakers, the resultant debris from this product would be finer and smaller in size which facilitates subsequent transportation and management.
    Video
    Advanced Tools and Equipment Laser Scanner PA20-030 Orica Mining Services (Hong Kong) Limited
    Tel: 3520 2039
    Orica-GroundProbe Geotechnical Monitoring LiDAR (GML) Technology – GroundProbe Laser Scanner
    The GML is a real-time construct to design solution, proven to significantly improve the efficiency and quality control of tunnel construction. When utilised during various stages of the construction cycle, the system tracks and verifies as-built construction against the desired design in real-time. Given its fast computing and high-accuracy scan registration, the GML computes high-density BIM point cloud data in real time. This gives users high-resolution 3D information of the current construction against the desired design profile. Highly accurate, detailed information such as overbreak, underbreak and shotcrete thickness is provided live to tunnelling crews with no manual processing. Real-time feedback allows crews to verify their construction and to make calculated decisions in real time to increase efficiency, save time and cost, and reduce rework with every advancement.
    Video
    Advanced Construction Material Rebar Coupler PA20-031 Pulwell Composites (H.K.) Limited
    Tel: 2488 7530
    McCalls FT UniFrictional Press Rebar Couplers
    The product is a kind of mechanical couplers for splicing the rebars which replaces the traditional treading process at the rebar ends. Through mechanical frictional rotation and axial pressure, heat is generated on the friction surface so that the material in a semi-molten state, and the thread is subject to pressure to firmly fuse the metals into one.
    Product Information
    Video
    Sensors and IoT Safety Monitoring System PA20-032 Transcendence Company Limited
    Tel: 2862 1724
    Ultra-wide Band Wireless Positioning Safety System
    The product is a “Worker Real-Time Positioning System” which incorporates smart watches and a central monitoring platform. By applying ultra-wide band positioning technology, it can track workers’ locations and health parameters even in sealed off space.

    Legend: 15
    Video
    Sensors and IoT Safety Monitoring System PA20-033 SmarTone Mobile Communications Limited
    Tel: 9451 4017
    SmartWorks – Safety Alert System for Temporary Lift Shaft Gate
    “SmartWorks – Safety Alert System” can provide alerts for unauthorised access to the restricted equipment and areas like lift shaft, which reduce the chance of injuries and accidents at construction site.

    Legend: 15
    Product Information
    Video
    Digitalisation 3D Reality Simulation / Data Management
    (CDE-related)
    PA20-034 Maxwell GeoSystems Limited
    Tel: 2581 2288
    MissionOS
    MissionOS is a cloud-based data management system for the acquisition, monitoring, analysis, visualisation and reporting of geotechnical and other project-related data in construction projects. It contains alert and alarm functions which can improve risk management performance and reduce cost.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Video
    Automation and Robotics Transportation Machine PA20-035 Karmo International Company Limited
    Tel: 2362 4843
    Apollo Go Go Trolley
    Apollo Go Go Trolley is a remote-controlled and electric-powered trolley for delivery of materials in construction sites. It could reduce manual handling of heavy loads to enhance productivity and safety during construction process.

    Legend: 15
    Video
    Advanced Construction Material Waterproofing Material PA20-036 Growtech Limited
    Tel: 2305 5222
    Growseal Versatile Nano-modified Cementitious Crystalline Waterproofing Material
    Growseal CCP / CCW can penetrate and seal up the micropores and shrinkage cracks inside the concrete. This product is not a covered membrane, it really treats the core of the substrate. With its low alkaline corrosion property, it can integrate with flexible polymer based waterproofing membrane to form a durable and efficient waterproofing system against positive and negative water pressure in various environment.

    Legend: 14
    Video
    Automation and Robotics Automatic Bar Bending Machine PA20-037 Machinery Expert Limited
    Tel: 2483 1289
    Y16 Automated Bending Machine (5 Benders)
    Model: BM-D16*5
    This product is an automatic rebar bending machine by using computerised control with 5 benders which makes all types of polygon automatically. It helps to save manpower, enhance accuracy and quality standard, reduce wastage, improve site safety, thus boosting productivity.
    Automation and Robotics Automatic Bar Bending Machine PA20-038 Machinery Expert Limited
    Tel: 2483 1289
    Y16 Automated Stirrup Machine
    Model: AM-D16
    The product is an automatic rebar stirrup bending machine by using computerised control which makes all types of polygon and circle automatically. It helps to save manpower, enhance accuracy and quality standard, reduce wastage, improve site safety, thus boosting productivity.
    Video
    Automation and Robotics Automatic Bar Bending Machine PA20-039 Machinery Expert Limited
    Tel: 2483 1289
    Y25 Automated Bending Machine (2 Benders)
    Model: BM-D25*2
    This product is an automatic rebar bending machine by using computerised control with 2 benders which makes 2 angles at the same time automatically. It helps to save manpower, enhance accuracy and quality standard, reduce wastage, improve site safety, thus boosting productivity.
    Video
    Sensors and IoT Movement Sensors PA20-040 Sixense Limited
    Tel: 2439 7833
    4DBloc (Deformation Monitoring Device)
    4DBloc is a GPS based single frequency device designed to be deployed on the field with multiple connected devices in a network. After connection to the web-based Geoscope platform, the system provides 3D mapping with time evolution for displacement monitoring in buildings or on ground surface.
    Advanced Tools and Equipment Positioning and Tilt Surveying Tool PA20-041 D-Reality Consultancy Limited
    Tel: 5625 2312
    Hi-Target V90 Plus GNSS RTK System, V90 Plus GNSS RTK Base System
    The V90 Plus is a digital measurement tool with hi-tech, fully integrated design for tilt survey and quasi-dynamic collection. A maximum tilt angle of 30 degrees and built-in electronic bubble enhance survey efficiency and accuracy.
    Video
    Advanced Tools and Equipment Digital Layout Tools PA20-042 Topcon Beijing (H.K.) Limited
    Tel: 2690 1328
    Robotic Total Station DS201I
    Robotic Total Station DS201I could import as-built BIM model which facilitates accurate and reliable site layout and measurement tasks. Its single-operator robotic system saves labour and enhances productivity.
    Product Information
    Video
    Advanced Tools and Equipment Digital Layout Tools PA20-043 Topcon Beijing (H.K.) Limited
    Tel: 2690 1328
    Robotic Total Station GT1001I
    Robotic Total Station GT1001 could import as-built BIM model which facilitates accurate and reliable site layout and measurement tasks. Its single-operator robotic system saves labour and enhances productivity.
    Product Information
    Video
    Advanced Tools and Equipment Electric Power Generator PA20-045 Ampd Energy Limited
    Tel: 3705 9441
    Ampd Enertainer
    Model: L, M, 300kVA
    The Ampd Enertainer is a battery energy storage system that provides electricity to construction sites. It replaces traditional diesel generator, which enhances environmental performance, improves site safety and reduces noise.

    Legend: 14
    Product Information
    Video
    Digitalisation 3D Reality Simulation / Data Management PA20-046 Hong Kong RFID Limited
    Tel: 3426 9511
    Building Component Management System (BCMS)
    Building Component Management System helps to maintain daily operations of managing building components with the help of RFID technology. The platform links the building components to the elements in the BIM model to update the work progress and element database on a real-time basis.
    Video
    Digitalisation 3D Reality Simulation / Data Management
    (CDE-related)
    PA20-047 Digital G Limited
    Tel: 9202 5335
    GEOMON
    GEOMON is a cloud-based instrumentation data storage and reporting system. It is an agnostic platform that can digitise and visualise data from any sensors such as tilt, vibration, settlement, groundwater and strain gauge sensors etc. Its interface includes graphical data, maps and videos. GEOMON is accessible on desktop, laptops and any mobile device.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Product Information
    Video
    Advanced Tools and Equipment Waste-water cooled Air Conditioning System PA20-048 Build King Construction Limited
    Tel: 2272 3680
    emMiC Stormwater Air Conditioning System
    A compact modular air-conditioning (A/C) system which improves sustainability in the construction and operation of A/C plant in three main areas: 1. using box culvert stormwater as the condensing media to increase energy efficiency; 2. adopting Design for Manufacture and Assembly where all E&M equipment are prefabricated off-site ready for connection on site; and 3. using light-weighted reinforced concrete to manufacture the module to lower embodied carbon.
    Video
    Digitalisation Project Management Software
    (DWSS-related)
    PA20-049 Epic Comm Company Limited
    Tel: 2320 8160
    Jobs Approve Application Flow Management System
    The system have three levels of authentication. The user may use the mobile app to submit application form with photo, the supervisor or management grade to approve. All application forms have the detailed information such as time stamp, user, status, result remarks, user in charge with detail flow information.

    (Note: This product has certain DWSS functions which the vendor shall be inquired for details.)
    Video
    Advanced Tools and Equipment Digital Layout Tools PA20-050 Beijing Tiantuo Tianbao Technology Co. Ltd.
    Tel: +86 010-51666050
    Trimble Total Station RTS771
    Trimble Total Station RTS771 could import as-built BIM model which facilitates accurate and reliable site layout and measurement tasks. It can save labour and enhances productivity.
    Advanced Tools and Equipment Hand-held Breaker PA20-051 Hilti (Hong Kong) Limited
    Tel: 8228 8118
    Hilti Breaker TE 3000-AVR
    Hilti TE 3000-AVR is a breaker for concrete demolition. It equips with Active Vibration Reduction technology which reduces worker’s effort and increase productivity in heavy demolition.

    Legend: 15
    Product Information
    Video
    Advanced Tools and Equipment Heat Resisting Reflective Vest PA20-052 Houston Environmental Materials Co. Limited
    Tel: 2554 1005
    Heat Shielding Reflective Vest with Nano Coating Technology
    The reflective vest is made with the nano-metal coated polyster net to reduce the body temperature rise of the wearer under direct sunlight exposure by reflecting the sunlight. The netting design also allows for proper ventilation.

    Legend: 15
    Product Information
    Video
    Others Industrialised Process – Robotic Welding # PA20-053 O-Link Limited
    Tel: 6633 9878
    Industrialised Process - Robotic Welding for Ductile Iron Pipes
    This off-site robotic welding and processing method is developed for application on ductile iron pipes and flanges or sockets of the following standards and sizes: DN80, DN100, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, and DN1000 which replaces on-site manual welding for MEP pipe installation for the MVAC and plumbing trades.

    #Please refer to the latest version of the Application Framework for the details of the funding mode for Industrialised Process – Robotic Welding.
    Video
    Others Industrialised Process – Robotic Welding # PA20-054 O-Link Limited
    Tel: 6633 9878
    Industrialised Process - Robotic Welding for Black Steel Pipes
    This off-site robotic welding and processing method is developed for application on black steel pipes and flanges or sockets of the following standards and sizes: DN50, DN65, DN80, DN100, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, and DN1000 which replaces on-site manual welding for MEP pipe installation for the MVAC and plumbing trades.

    #Please refer to the latest version of the Application Framework for the details of the funding mode for Industrialised Process – Robotic Welding.
    Video
    Sensors and IoT Safety Monitoring System PA20-055 Beeinventor Limited
    Tel: 9757 2952
    UWB Collision Warning System
    Collision warning system could provide real-time safety alert for workers and plant operator by using UWB technology. Many accidents happening on site involve workers being hit by moving plant and machines. An accurate collision warning system can prevent this kind of accidents in a cost effective way. The system adopts the latest UWB - Ultra Wide Band technology. The plant with a UWB detector sets a virtual working perimeter and any worker with an UWB tag entering the perimeter will trigger the alarm to warn workers and the operator to stop the plant so as to prevent collision accidents. The accuracy is up to centimeter level and in all directions.

    Legend: 14, 15
    Product Information
    Video
    Automation and Robotics Automatic Bar Bending Machine PA20-056 Easy Steel Engineering Limited
    Tel: 2433 1300
    Easy Automatic Bar Bending and Cutting Machine
    Model nos: AI-12, AI-16, AI-12 (Series 2)
    It is an automatic bar bending and cutting machine (for bars size in 5mm to 16mm). It can process stirrup and allow special shape processing up to 500 types of bar shapes. It also increases productivity from 0.5 ton to 1.5 ton per manday. Moreover, two pieces of bars can be processed at the same time, which can increase the productivity.
    Product Information
    Automation and Robotics Automatic Bar Cutting Machine PA20-058 Easy Steel Engineering Limited
    Tel: 2433 1300
    Easy AI-C-40 Automatic Bar Cutting Machine
    Easy AI-C-40 is an automatic bar cutting machine for bars size in 5mm to 40 mm. It can increase productivity from 0.5 ton to 1.5 ton per manday. It can control the length accuracy within ±6mm which ensure the quality of the processed re-bars. Applying programmable logic control (PLC), it could improve the accuracy and minimize the error. It can also store different sizes of processed re-bars to release more working spaces.
    Automation and Robotics Automatic Bar Bending Machine PA20-059 Easy Steel Engineering Limited
    Tel: 2433 1300
    Easy AI-B2-32 Automatic Bar Bending Machine (2 Benders)
    Easy AI-B2-32 is an automatic bar bending machine (for bars size in 10mm to 32mm). It also has bi-directional bending function and 2 benders allow special shape processing up to 500 types of bar shapes and increases productivity from 0.5 ton to 1.5 ton per manday. 2 heads of bender work simultaneously, which enhances the productivity compared to traditional single bender.
    Automation and Robotics Automatic Bar Bending Machine PA20-060 Easy Steel Engineering Limited
    Tel: 2433 1300
    Easy AI-B4-32 Automatic Bar Bending Machine (4 Benders)
    Easy AI-B4-32 is an automatic bar bending machine (for bars size in 10mm to 32mm). It also has bi-directional bending function and 4 benders allow special shape processing up to 500 types of bar shapes and increases productivity from 0.5 ton to 1.5 ton per manday. 4 heads of bender work simultaneously, which enhance the productivity compared to traditional single bender.
    Automation and Robotics Automatic Bar Bending Machine PA20-061 Easy Steel Engineering Limited
    Tel: 2433 1300
    Easy AI-B5-16 Automatic Bar Bending Machine (5 Benders)
    Easy AI-B5-16 automatic bar bending machine (for bars size in 10mm to 16mm). It also has bi-directional bending function and 5 benders which allows special shape processing up to 500 types of bar shapes and increases productivity from 0.5 ton to 1.5 ton per manday. 5 heads of bender work simultaneously, which enhance the productivity compared to traditional single bender.
    Advanced Tools and Equipment Unmanned Vessel for Under Water Surveying PA20-062 D-Reality Consultancy Limited
    Tel: 5625 2312
    Unmanned Surface Vessel iBoat BS3
    Surveying Unmanned Surface Vessel iBoat BS3 is a swift and intelligent surveying unmanned surface vessel with a high-performance single beam echo sounder, high-precision GNSS positioning and on-board data control and acquisition software. Comparing with the traditional survey approach by manual survey vessel, productivity, cost effectiveness and safety would be significantly enhanced.
    Product Information
    Advanced Tools and Equipment Lifting Crane PA20-063 Sky Well Industrial Equipment Company Limited
    Tel: 3990 6999
    Cormach Truck Mounted Crane 240000AX E series
    Cormach Truck Mounted Crane, equipped with Control system level 6 (2016), is capable of showing on the display the calculated value of the lifted load and all key working parameters. The permitted lifting capacity is continuously determined according to the rotation angle, the outriggers positions and the action of the counterweight.

    Legend: 15
    Sensors and IoT Movement Sensors PA20-064 Sixense Limited
    Tel: 2439 7833
    ShapeArray
    Model: SAAV, SAAX
    ShapeArray (SAAV & SAAX) is an automated shape-measuring, inclinometer-style instrument used to monitor deformation of soil and structures like dams, tunnels, walls, and buildings. ShapeArray data are available in real-time, enabling engineers and designers to reduce risk and save money by making smarter, faster decisions. By having this automated system, workers are not required to perform manual measurements.
    Sensors and IoT Movement Sensors PA20-065 Sixense Limited
    Tel: 2439 7833
    Loadsensing Wireless Monitoring System
    This product is a data acquisition and monitoring system which combines wireless monitoring and advanced software tools for connecting and monitoring infrastructures in remote locations. Load sensing devices are battery-powered and equipped with long-range, low-power wide area network (LPWA) radio communications and are compatible with a wide range of geotechnical sensors. The software suite is web-based and facilitates real-time data capture and analytics. It is also possible to set automatic alarms.
    Video
    Advanced Tools and Equipment Drone PA20-066 South Instruments Technology Limited
    Tel: 9293 3993
    UAV-based LiDAR System Z-Lab librid 6
    This product is an unmanned aerial vehicle with a built-in laser scanner and inertial measurement unit (IMU) sensor of particularly lightweight in less than 7kg weight. It is capable of traditional photogrammetry surveying and laser scanning surveying.
    Digitalisation 3D Reality Simulation / Data Management PA20-067 Esri China (Hong Kong) Limited
    Tel: 3768 5962
    Drone2Map for ArcGIS (Standard)
    Drone2Map for ArcGIS is a desktop app which turns raw still imagery captured from drones into 2D (e.g. orthomosaics) and 3D imagery products (e.g. point clouds and 3D meshes) in ArcGIS for land analysis, scheduled events monitoring, or asset and infrastructure inspection.
    Product Information
    Video
    Digitalisation 3D Reality Simulation / Data Management
    (CDE-related)
    PA20-068 Esri China (Hong Kong) Limited
    Tel: 3768 5962
    ArcGIS Enterprise Standard
    ArcGIS Enterprise Standard is a GIS software system for online mapping, visualization, real-time spatial analysis, APIs, and data management. It is closely integrated with ArcGIS Desktop for mapping and authoring, and also integrated with ArcGIS Online for sharing content between systems.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Product Information
    Video
    Digitalisation 3D Reality Simulation / Data Management
    (CDE-related)
    PA20-069 Esri China (Hong Kong) Limited
    Tel: 3768 5962
    ArcGIS Online
    ArcGIS Online is a web-based GIS mapping platform with spatial analysis and 3D visualization capabilities. It is a SaaS (Software as a Service) platform with field apps for creating, editing and managing 2D and 3D data at any time and place. It can be fully integrated with ArcGIS Desktop.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Product Information
    Video
    Digitalisation Digitised Reporting Tool for Underground Pipe Survey PA20-070 MSDI (China) Limited
    Tel: 2784 0109
    Drainage Condition Assessment and Management System (DCAMS)
    Drainage Condition Assessment and Management System (DCAMS) is the system developed for underground utility in Hong Kong. DCAMS adopts Conduit Condition Evaluation Codes (CCEC) in its system design. The codes are particularly used to evaluate of deterioration of pipelines.
    The conditions of pipelines and manholes can be assessed in a more accurate and effective way. Site data can be smartly converted to reports. Historical data can also be compared with the current data to generate analysis for management decision. With DCAMS, site operators can work safely and more efficiently.
    DCAMS has also been accredited by the two recognized utility institutes in the industry, i.e. International Institute of Utility Specialists (IIUS) and Hong Kong Institute of Utility Specialists (HKIUS).
    Video
    Digitalisation 3D Reality Simulation / Data Management PA20-071 SAALG Geomechanics SL
    https://www.saalg.com
    DAARWIN: On-line Platform for Geotechnical Observational Method Implementation
    DAARWIN is a cloud-based online platform which adopts the Observational Method as the methodology and based on machine learning algorithms to analyse and compare a great number of numerical models with a large volume of monitoring data registered by instruments installed on site. With this platform, users can check the accuracy of their prediction of geotechincal design with respect to the real-time soil parameters, thereby detecting instabilities in advance and optimising their geotechnical design.
    Video
    Digitalisation 3D Reality Simulation / Data Management
    (CDE-related)
    PA20-072 isBIM Limited
    Tel: 2382 8380
    AlphaBIM Project Management and Control Platform
    AlphaBIM is a project management and control platform which provides a centralized platform for recording, tracking, statistical anlaysis, visualization, sharing and documentation of issues relating to construction progress and workflow management, cost management, and safety and quality problems found on site.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Product Information
    Video
    Sensors and IoT Safety Monitoring System PA20-073 Kong Chun Construction Machinery Services Centre Limited
    Tel: 2475 1083
    I-Vision Smart Monitoring System 5.0
    This product is a safety monitoring system installed on heavy construction plant for obstacles detection and real-time acquisition of surrounding environment. It provides synthesized image with 360° bird's-eye view, panoramic detection of obstacle within 1 metre, and siren and signal light when there are obstacles in the detection range, thus improving workers' safety when plant is in the operation.

    Legend: 14, 15
    Product Information
    Digitalisation 3D Reality Simulation / Data Management
    (CDE-related)
    PA20-074 Projection (HK) Limited
    Tel: 2973 6243
    Scenario
    The product is a Project Management Information System (PMIS), which provides functionality for paperless document & information management, online collaboration, electronic drawing reviews, QA/QC management, with an integrated BIM viewer. The software can also run budget, cost, progress & forecast controls, all underpinned by the comprehensive workflow manager, dashboards & reporting functions.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Product Information
    Video
    Digitalisation 3D Reality Simulation PA20-075 Beijing Tiantuo Tianbao Technology Co.,Ltd.
    Tel: +86 15563235617
    Trimble XR10 with Hololens 2
    Trimble XR10 with Hololens 2 is a Mixed Reality (MR) technology which integrates virtual design models with the reality image to visualise the anticipated work completion condition and enhance the collaboration of different project participants during the construction process. Compared with Augmented Reality (AR) and Virtual Reality (VR) technology, MR is more handy and flexible and provides wider view.
    Video
    Advanced Tools and Equipment Laser Scanner PA20-076 Beijing Tiantuo Tianbao Technology Co.,Ltd.
    Tel: +86 15563235617
    Trimble TX8 3D Laser Scanner
    Trimble Tx8 laser scanner can capture geometric data of graphics on a large surface with an error of + / - 2mm and a speed of 1 million points per second. The measurement speed is faster than traditional measurement methods and the measurement is very efficient and non-contact. The measurement result is a three-dimensional point cloud model, which is more intuitive than traditional measurement results. The measured data results can also be directly connected to BIM software.
    Digitalisation 3D Reality Simulation / Data Management PA20-077 Hong Kong RFID Limited
    Tel: 3426 9511
    GXBIM
    GXBIM is designed as a platform for collaborative usage of BIM model and 360 imagery which creates additional value from these existing data sources. Unlike the existing products in market which emphasizes on exploring sole usage of BIM, this system is dedicated to increase the accessibility and usability of data from the two worlds - virtual (BIM) and reality (360 imagery) to achieve effective progress and defect detection & management.
    Video
    Digitalisation Project Management Software
    (DWSS-related)
    PA20-078 Yonyou (Hong Kong) Co. Ltd
    Tel: 3907 3052
    Construction Resource Planning
    This product is a project management platform with the major functions of form digitization, instant issuance and approval of forms, approval flow management, task tracking and data visualization to facilitate effective collaboration. It includes various modules such as safety, environmental, site and asset management and RFI.

    (Note: This product has certain DWSS functions which the vendor shall be inquired for details.)
    Video
    Digitalisation 3D Reality Simulation / Data Management
    (CDE-related)
    PA20-079 Glodon (Hong Kong) Software Limited
    Tel: 2333 7535
    G-Site
    G-Site is a BIM-based project information management platform for recording, tracking, analysis, sharing and documentation of issues relating to construction process, quality control and safety management. It allows component tracking by numbering each element with QR code for users to scan, report and track quality issues. G-Site allows merging of several BIM models, and to integrate with 2D drawings and progress chart for project management.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Digitalisation 3D Reality Simulation / Data Management PA20-080 Ambit Geospatial Solution Limited
    Tel: 3462 3320
    SkylineGlobe - TerraBuilder
    TerraBuilder is a 3D terrain database creator with tools for manipulating and merging aerial photos, satellite images, and digital elevation models of different sizes and resolutions. The resulting photo-realistic, geographically-accurate terrain database can be made available to users of TerraExplorer (PA20-081) or published to remote users.
    Digitalisation 3D Reality Simulation / Data Management
    (CDE-related)
    PA20-081 Ambit Geospatial Solution Limited
    Tel: 3462 3320
    SkylineGlobe - TerraExplorer (Desktop, Web and Mobile)
    SkylineGlobe - CityBuilder
    (Plug-in for TerraExplorer for Desktop (PA20-081 )

    TerraExplorer is a family of software designed for viewing, querying, analysing and presenting geospatial data in a high resolution 3D environment. This TerraExplorer family comprises 3 products, including: (i) TerraExplorer for Desktop, which is a standalone desktop software for viewing, analysing and editing data;
    (ii) TerraExplorer for Web, which is a web-based software to be used in conjunction with SkylineGlobe Server (PA20-082) for building up cloud platform; and
    (iii) TerraExplorer for Mobile, which is a mobile app for viewing data only.

    CityBuilder is a plug-in module for 'TerraExplorer for Desktop' (PA20-081). The major function of CityBuilder is to merge 3D city models generated by PhotoMesh (PA20-083), with classification layers, individually modeled layers, and BIM datasets, into a stream-optimized, fully textured, and geospatially-enabled mesh layer (3DML). The generated 3DMLs can be made available to the users of TerraExplorer (PA20-081) which supports visualization and geospatial analysis.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Digitalisation 3D Reality Simulation / Data Management
    (CDE-related)
    PA20-082 Ambit Geospatial Solution Limited
    Tel: 3462 3320
    SkylineGlobe - SkylineGlobe Server
    SkylineGlobe Server (SGS) is an enterprise software and private cloud solution that provides a comprehensive set of web services for publishing, storing, managing and streaming 3D spatial data. When SGS is used together with 'TerraExplorer for Web' (PA20-081), it can serve analytic and visualization functions such as distance and area measurement, as well as graphic terrain profile. While SGS is used alone, it can solely serve the storage, retrieval and sharing functions.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Digitalisation 3D Reality Simulation / Data Management PA20-083 Ambit Geospatial Solution Limited
    Tel: 3462 3320
    SkylineGlobe - PhotoMesh
    PhotoMesh fully automates the generation of high resolution, textured, 3D mesh models from standard 2D photographs. The core technology includes high-performance photogrammetry, computer vision, and computational geometry algorithms. It can combine unlimited number of photographs in a wide range of formats and resolutions, to generate highly detailed 3D models which can be viewed and analysed using TerraExplorer (PA20-081).
    Advanced Construction Material Lightweight Synthetic Stone Material PA20-084 Fibrpro International Ltd.
    Tel: 3568 3417
    Synthetic Stone Grating / Tree Pit
    This product is a light weight, precast synthetic stone gratings units fabricated by resin / polymer material / quartz sand, natural or recycled crushed stone and recycled fillers through compaction under vacuum and high pressure compression process.
    Sensors and IoT Safety Monitoring System PA20-085 Hornbird Technology Limited
    Tel: 6705 0848
    BLE Material & Attendance Tracker
    This product is a location and attendance tracker called“meTrack”which consists of“NearBy”,“realTime”and “safetyMeter”modules. This Bluetooth based product will help keep track of the exact locations of workers, thereby maximising safety.

    Legend: 15
    Advanced Tools and Equipment Digital Layout Tools PA20-086 Leica Geosystems Limited
    Tel: 2161 3881
    Leica Nova MS60 MultiStation
    This product is a multi-station which provides the functions of both total station and laser scanner. It is BIM work flow oriented which helps reduce the number of workers and takes shorter time to complete a task.
    Advanced Tools and Equipment Drone PA20-087 Ambit Geospatial Solution Limited
    Tel: 3462 3320
    Rotary Unmanned Aerial Vehicle SP1-MKIV
    SP1-MKIV is a rotary Unmanned Aerial Vehicle for aerial surveying and data capturing in the construction process. Its core technology includes automatic take-off and auto-landing system, and equal distance / time interval mode of capturing. It allows accurate and time-saving flight plan and supports multi-camera and interchangeable lens.
    Digitalisation Project Management Software
    (DWSS-related)
    PA20-088 Innovative Associate Technology Limited
    Tel: 2466 9566
    Innoshare - Digital Works Supervision System (DWSS)
    Innoshare – DWSS provides a secured platform with mobile app and web portal that supports the entire process of site activities, including (i) Electronic Request for Inspection System (E-RISC), (ii) Electronic Site Diary & Labour Return Record System (E-Diary), and (iii) Electronic Safety & Environmental Checklist System.

    (Note: This product has certain DWSS functions which the vendor shall be inquired for details.)
    Product Information
    Video
    Advanced Construction Material Lightweight Plaster PA20-089 CaSO (HK) Engineering Company
    Tel: 2887 8543
    AUGREEN Lightweight Plaster
    Model: AC075
    AUGREEN AC075 is an environmentally friendly lightweight gypsum plaster. It is suitable for either spraying or manual trowel application. It could apply up to 25 mm in one coat. As it is light in weight and has high adhesion when compared to traditional cement-sand render, the risk of collapsing is reduced. Unlike the traditional cement-sand render, the crack resistance property of shrinkage-compensated AC075 minimizes potential defects. Applying sealer and/or spatterdash on concrete walls may also be eliminated (subject to contract requirements), thereby reducing application time and hence improving productivity.
    Sensors and IoT Safety Monitoring System PA20-090 Customindz Limited
    Tel: 9125 3390
    Danger Zone Alert Sensoring System
    This product is a sensoring system installed on construction vehicles to provide both visual alert on monitor and audio sound alert to the operator when there are pedestrians walking or standing nearby the vehicle, thus ensuring workers' safety during plant operation. This product allows users to adjust the zoning distance. It can also detect default objects (e.g. vehicles) to avoid false alarms.

    Legend: 14, 15
    Digitalisation 3D reality simulation / Data management
    (CDE-related)
    PA20-091 Autodesk Inc
    Tel: 2824 2338
    BIM 360 Build - User Pack CLOUD New Subscription
    This is a construction project management software which can improve construction quality control and safety programmes, create, assign, and manage issues, RFIs, and submittals, and track field performance with dashboards and reports.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Digitalisation 3D reality simulation / Data management
    (CDE-related)
    PA20-092 Autodesk Inc
    Tel: 2824 2338
    BIM Collaborate Pro - CLOUD Commercial New Subscription (formerly known as BIM 360 Design)
    It is a design collaboration software which allows real-time Revit cloud worksharing and collaboration workflows for Civil 3D and Plant 3D, securely co-author Revit models and access Civil 3D and Plant 3D files, across one firm or multiple firms, thereby improving productivity, reducing rework and accelerating project delivery.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Digitalisation 3D reality simulation / Data management
    (CDE-related)
    PA20-093 Autodesk Inc
    Tel: 2824 2338
    Autodesk Docs - CLOUD Commercial New Subscription
    It is a construction document management software which can share, view, markup, and manage your construction drawings, documents, and models at anytime and anywhere. It can reduce errors, facilitate decision making and improve project outcomes.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Digitalisation 3D Reality Simulation / Data Management PA20-094 Autodesk Inc
    Tel: 2824 2338
    BIM Collaborate - Packs CLOUD Commercial New Subscription (formerly known as BIM 360 Coordinate)
    It is a BIM collaboration software to conduct constructability review process on the jobsite or in the office and to identify costly issues during preconstruction. It can speed up multi-discipline coordination with clash resolution workflows.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Digitalisation 3D reality simulation / Data management PA20-095 Autodesk Inc
    Tel: 2824 2338
    Point Layout Commercial New ELD Subscription
    It is a point placement and construction site layout software to get BIM data to the field and back, quickly and easily, create points automatically. It can export, import and compare location points. It can also push points directly to mobile app as 3D model-based layout.
    Digitalisation 3D Reality Simulation / Data Management PA20-096 Autodesk Inc
    Tel: 2824 2338
    ReCap Pro Commercial New ELD Subscription
    It is a reality capture software to create 3D models from imported photographs and laser scans and to deliver a point cloud or mesh in support of BIM processes. It facilitates collaboration across teams with design based on reality.
    Digitalisation 3D reality simulation / Data management
    (CDE-related)
    PA20-097 Autodesk Inc
    Tel: 2824 2338
    Vault Professional Commercial New ELD Subscription
    It is a product data management (PDM) software for users to works from a central source of organized data. It facilitates collaboration, reduces errors and time saving.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Digitalisation 3D reality simulation / Data management PA20-098 Bentley Systems Hong Kong Limited
    Tel: 2802 1030

    Digital BIM Limited
    Tel: 9275 1155
    Context Capture Basic with SELECT Subscription
    This product creates 3D engineering-ready reality meshes of existing conditions for infrastructure projects with simple photographs and/or point clouds. Without the need for expensive, specialized equipment, the user can quickly create and use these highly detailed, 3D reality meshes to provide precise real-world context for design, construction, and operations decisions for use throughout the lifecycle of a project.
    Digitalisation 3D reality simulation / Data management
    (CDE-related)
    PA20-099 Bentley Systems Hong Kong Limited
    Tel: 2802 1030

    Digital BIM Limited
    Tel: 9275 1155
    ProjectWise Connect Edition
    It is a project collaboration and content management platform that helps project-intensive companies avoid risk and stay competitive by enabling high performance project delivery. It provides information sharing, cross-functional work process management, and content management required to improve agility and increase transparency throughout the project lifecycle. With ProjectWise, the user can build your CDE and have the ability to integrate data, people, and process to ensure successful project delivery.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Digitalisation 3D reality simulation / Data management
    (CDE-related)
    PA20-100 Bricsys NV
    Tel: 3950 3353
    Bricsys 24/7 Project Collaboration Platform (Cloud based)
    Bricsys 24/7 offers safe and easy document management. Access user's documents from anywhere. Share, annotate and collaborate on building projects in a common data environment with your teams across the globe. View them on any device. Key functions include:
    •Manager documents securely
    •Role-based access control
    •BIM Model Manager
    •Automate repetitive tasks.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Digitalisation 3D reality simulation / Data management PA20-101 Spatial Technology Limited
    Tel: 2636 6102
    Verity
    Verity is an intelligent BIM Audit software offering automated process and tools for users to check the as-built BIM model accuracy & details against the actual built environment, improving the accuracy of as-built & increasing the project productivity.
    Digitalisation 3D reality simulation / Data management PA20-102 Spatial Technology Limited
    Tel: 2636 6102
    EdgeWise
    Edgewise software, the most advanced as-built modelling platform, offers a host of modelling features and tools that helps users quickly covert point clouds to usable as built 3D models, reducing modelling time by up to 75%.
    Advanced Tools and Equipment Laser Scanner PA20-103 Leica Geosystems Limited
    Tel: 2161 3891
    Leica BLK2GO Handheld 3D Laser Scanner
    This handheld imaging laser scanner recreates spaces in 3D as the user moves. It captures images and dimensionally accurate point clouds in real-time and uses SLAM technology to record the scanning trajectory through space. The GRANDSLAM (Simultaneous Localization and Mapping) is a combination of high-speed dual axis LiDAR, multicamera vision system, and an inertial measurement unit that makes the product self-navigating.
    Advanced Tools and Equipment Positioning and Tilt Surveying Tool PA20-104 South Instruments Technology Limited
    Tel: 9293 3993
    SOUTH G6 GNSS Receiver
    This product is a GNSS receiver that adopts intelligent cloud platform as its new engine for surveying purpose. It is equipped with standard 4G module which supports 4G network and downward compatible with 3G and 2G networks. It supports Smart PPP dialing technology which can automatically dial and ensure it remains online continuously during the survey.
    Automation and Robotics Automatic Bar Bending Machine PA20-105 Hop Shing Machinery Factory
    Tel: 2448 4267
    Automatic Dual Head Steel Bar Bending Machine (with Feeder)
    Model: HSTB-25
    This product is an automatic double-ended steel bar bending machine with an automatic feeder, which can help workers to perform steel bending and steel lifting work. The product has the following features:
    -Less volume than similar products, meeting Hong Kong processing needs
    -Equipped with automatic loading and unloading function
    -The cylinder has its own automatic drainage function, and the life of the parts is longer
    Video
    Advanced Tools and Equipment Digital Layout Tools PA20-106 MyBIM Ltd
    Tel: 2806 2699
    SATLAB Total Station - SLT2
    This product is a total station equipped with reflectorless Electromagnetic Distance Measurement (EDM) feature as well as the Satcont onboard software for setting out, measurement and positioning on site.
    Video
    Advanced Tools and Equipment Safety Hook PA20-107 Elebia Autohooks S.L.U.
    https://elebia.com/
    Elebia Evo Automatic Hook
    Model: Evo2, Evo5, Evo10, Evo10 Compact, Evo20, Evo25
    This automatic hook for lifting is equipped with a magnet and sensor in its lower section that attracts and correctly positions the shackle. The operator can either close the hook by pushing the button remotely, or the hook can close itself when the shackle is correctly placed as assessed by the sensor. Additionally, the hook can also be equipped with a load sensor indicating how much weight it is lifting, its position and the load horizontal alignment. All this information is recorded in its "eMax" remote control that acts as a hub gathering the information and recording the activity of the hook. This information can be processed for data analysis or BIM modelling.

    Legend: 15
    Video
    Digitalisation 3D Reality Simulation / Data Management PA20-108 Leica Geosystems Limited
    Tel: 2161 3891
    Leica Cyclone Series
    3DR (Pro Edition), MODEL, SURVEY, PUBLISHER, REGISTER
    3DR (Pro Edition) is a point cloud post processing, mesh model generation and model comparison desktop software which offers specialised workflows to meet the needs of key industries with applications in transportation, architecture, land surveying and tank inspection.
    Model / Survey is a point cloud data processing and model visualisation desktop app which allows automatic pipe run modeling in a given model (for Model only, not available in Survey) and provides automating many time-consuming tasks and even letting multiple users work on the same data sets simultaneously.
    PUBLISHER Pro is a model publication app for creating files that can be used in other processing software like Cyclone (Leica), JetStream, TruView and CloudWorx families and providing simple data access and a streamlined user access experience via the LGS file, Leica Geosystems universal digital reality file, which means it letting user access project data in any software (e.g. Photoshop) with a single publish.
    REGISTER is a point cloud registration app which allows import and processing of the raw data obtained from Leica or other brands of laser scanners such as Faro, Z+F while other software could only process the raw data of their own brands but not Leica. This software could process point cloud data from other brands of laser scanners and Leica. It's SmartAlign function could align models automatically based on common geometry.
    Advanced Tools and Equipment Lifting Crane PA20-109 Liebherr (HKG) Limited
    Tel: 3142 3142
    Liebherr Mobile Crane
    Model: LTM1060-3.1, LTM1230-5.1, LTF1060-4.1, LTM 1120-4.1, LTM 1150-5.3
    This product is a mobile crane equiped with an patented AI technology called "Vario Base" . It can continuously monitor and indicate the Safe Working Load at variable supporting or load lifting conditions of the crane on a real-time basis. Further to warning alert, the cane will automatically stop when overload occurs until it returns to safe position.

    Legend: 15
    Product Information
    Digitalisation 3D Reality Simulation / Data Management PA20-110 Bentley Systems Hong Kong Limited
    Tel: 2802 1030
    gINT Professional
    This product provides centralized data management and reporting for geotechnical subsurface projects of all types. It builds on the data management and reporting capabilities of gINT Logs, providing enhanced interoperability and expanded report options for boring and well logs. Users can utilize the same data to create fence diagrams, graphs, tables, and other customized report. Data collected and stored in gINT can be used in a Civil Model.
    Digitalisation 3D Reality Simulation / Data Management PA20-111 Bentley Systems Hong Kong Limited
    Tel: 2802 1030
    PLAXIS 2D
    This product is a geotechnical analysis software using finite element package for two-dimensional analysis of deformation and stability in geotechnical engineering and rock mechanics. This software guides users across several modes to efficiently create models with a logical geotechnical workflow. This software could be used in various analysis including rock-mass response and surface settlement analysis (e.g. for tunneling work), slope stability and seepage analysis, differential settlement prediction adjacent to excavation pit and bearing capacity and foundation settlement analysis (e.g. for high-rise buildings).
    Digitalisation 3D Reality Simulation / Data Management PA20-112 Bentley Systems Hong Kong Limited
    Tel: 2802 1030
    PLAXIS 3D
    This product is a geotechnical and using finite element package for three-dimensional analysis of deformation and stability in geotechnical engineering and rock mechanics. This user-friendly software guides users across several modes to efficiently create models with a logical geotechnical workflow. This software could be used in various analysis including rock-mass response and surface settlement analysis (e.g. for tunneling work), slope stability and seepage analysis (for earth, embankments etc.), differential settlement prediction adjacent to excavation pit, analysis of stability of and seepage into excavation pits/ lateral displacements of diaphragm walls and bearing capacity analysis of suction anchors.
    Advanced Tools and Equipment Lifting Crane PA20-113 China Ascent Engineering Limited
    Tel: 3173 2722
    Palfinger Hydraulic Truck Mounted Crane
    Model: PK 37.002 TEC 7, PK 92002 SH, PK 110002 SH, PK 65002 SH
    This hydraulic truck-mounted crane has features such as P-Profile, High Performance Stability Control (HPSC), HPSC-Plus LOAD function and P-FOLD. The major merits brought by the HPSC system enable real-time Safe Working Load detection at different stabilizer extensions and lifting boom outreachng conditions.

    Legend: 15
    Product Information
    Video
    Automation and Robotics Drill Rig PA20-114 Sandvik Hongkong Limited
    Tel: 2963 4231
    SANDVIK Top Hammer Surface Drill Rig Ranger
    Model: DX800
    This product is a hydraulic, self-propelled, crawler based surface drilling rig equipped with a cabin meeting Falling-Object Protective Structures (F.O.P.S.) and Roll-Over Protective Structures (R.O.P.S.) standards, Rock Pilot System, TIM3D hole navigation system, patented Noise Guard technology and automatic rod handling system. Typical applications are road cutting, pipe-line drilling and foundation drilling, as well as production drilling in medium-size quarries.
    Video
    Advanced Tools and Equipment Lifting Crane PA20-115 Sanroc International (Hong Kong) Limited
    Tel: 2881 1110
    Jekko Mini Crane
    Model: SPX424 CDH, SPX424 C+
    Jekko SPX424 is a mini crane for lifting operation equipped with five key features: (a) extendable crawler tracks, (b) digital-multi-proportional remote radio control, (c) automatic stability control, (d) plug and play system control to attach different accessories, and (e) remote and real time crane monitoring using an optional software J-Connect. These five features enable more precise movement and safer lifting operation of the crane.

    Legend: 15
    Product Information
    Sensors and IoT Safety Monitoring System PA20-116 XenseTech Limited
    Tel: 5616 6382
    EverHigh Precise Positioning & Safety Management System
    This product uses Ultra-wide Band (UWB) technology to achieve positioning with an accuracy of 10 cm, effectively managing the labor force, monitoring the status and distribution of workers, ensuring worker safety and improving management quality. At the same time, the system provides high-precision alarms through different configurations to reduce common accidents in construction sites and improve site safety.

    Legend: 15
    Product Information
    Video
    Automation and Robotics Drum Roller/ Soil Compactor PA20-117 Chi Shing Equipment Trading Company Limited
    Tel: 2771 3118
    BOMAG Single Drum Rollers & Soil Compactors
    Model: BW211D-5, BW213D-5, BW216D-5, BW219D-5, BW226DH-5
    This product is a single drum roller and soil compactor equipped with a numbers of IoT features to enhance productivity, quality and environmental performance including BOMAG TELEMATIC which is a cloud-based programme enabling remote real-time monitoring and fleet management, BOMAG ECONOMIZER which measures and displays the increase in compaction and the optimum speed to avoid over compaction, TERRAMETER which measures the actual compaction values, VARIOCONTROL which adjusts the machine's control setting for the specified compaction value and gives alert when it is reached, BOMAG Compaction Management (version BCM05) which continuously documents the compaction progress, ECOMODE which avoid engine speed higher than required to save fuel, and ECOSTOP which stops the engine when idling.
    (VARIOCONTROL & BCM05 are not applicable to Model: BW211D-5 & BW216D-5)
    Product Information
    Video
    Automation and Robotics Asphalt Roller PA20-118 Chi Shing Equipment Trading Company Limited
    Tel: 2771 3118
    BOMAG Asphalt Rollers
    Model: BW120AD-5, BW135AD-5
    This product is an asphalt roller equipped with a number of IoT features to enhance productivity, quality and environmental performance, including BOMAG TELEMATIC which enhances the efficiency of management the fleet on site, BOMAG ECONOMIZER which measures and displays the increase in compaction and the optimum speed to avoid over compaction, and ECOSTOP which stops the engine when idling.
    Product Information
    Video
    Sensors and IoT Safety Monitoring System PA20-119 Karta-X Technologies Limited
    Tel: 3619 0620
    Karta-X AI Assisted Construction Safety Analytic (KACSA)
    This product is a construction site safety monitoring platform. It has an AI analytical tool for determining workers behavior captured by CCTVs with functions including workers' attendance and PPE identification, machine identification and suspicious personnel detection for better site management. Alert could be delivered by web, emails or APPs.

    Legend: 15
    Product Information
    Video
    Digitalisation Project Management Software
    (DWSS-related)
    PA20-120 isBIM Limited
    Tel: 2382 8380
    Jarvis freeFORM
    This product is a project management platform with the core functions of form digitization and approval, approval flow management, data visualization and analysis, and report generation. It support real-time and multi-project management. Users can collect and update site data record with mobile devices through customized forms and approval workflow. This system has 50+ standard forms including Request for Inspection/Survey Check (RISC) forms, site diary, site cleanliness, labour return and site safety, etc. Through dashboard and reports, users can closely track and monitor the site and project status.

    (Note: This product has certain DWSS functions which the vendor shall be inquired for details.)
    Product Information
    Video
    Advanced Tools and Equipment Lifting Crane PA20-121 Folks Machinery and Equipment Limited
    Tel: 2649 9282
    Effer Truck Mounted Crane
    Model: 525/4S, 525/6S, 525/8S, 685/6S, 685/8S, 685/9S, 955/6S, 955/8S, 955/9S, 1255/6S, 1255/8S, 1255/9S
    This product is equipped with Stability Control System (Progress 2.0) which can continuously monitor and indicate the Safe Working Load at different outrigger extensions or load lifting conditions of the crane on a real-time basis.

    Legend: 15
    Automation and Robotics Automatic levelling checking and paving system for asphalt / concrete paving machinery PA20-122 Topcon Beijing (H.K.) Limited
    Tel: 2690 1328
    Topcon 3D Precision Paving Control System 3DMC mmGPS
    This product is an automatic system for asphalt / concrete paving machinery which combines laser technology and GPS to perform real-time levelling checking and paving work automatically. The laser receiver could receive data up to 4 transmitter units which could achieve a maximum 2400m horizontally (600m per transmitter) and 40m vertically (10m per transmitter). It allows the paver to carry out the works according to the design drawings (such as: dwg & dxf format) and instantly compare the paving level with the design drawing.
    Product Information
    Video
    Digitalisation 3D Reality Simulation / Data Management PA20-123 3D PDF System Limited
    Tel: 3899 4192
    PDF3D ReportGEN
    This is a digital data conversion software to convert complex and large GIS models/landscapes into smaller 3D PDF geospatial BIM models with manageable file sizes, for easy storage, sharing and communication among project teams. With its compression technology for complex data, this product can create sharp and full colour 3D images without compromising critical information and image quality. Compared with existing 3D PDF softwares in the market which mainly focus on industrial engineering and Architectural, Construction and Engineering (AEC) BIM, this product is specialised in civil, geotechnical and geospatial engineering applications.
    Product Information
    Video
    Sensors and IoT Movement Sensors PA20-124 South Instruments Technology Limited
    Tel: 9293 3993
    South Real Time Monitoring System (SMOS)
    This product is a web / APP based monitoring system that includes various GPRS- and GNSS-based sensors for site condition monitoring such as inclination, settlement & positioning and 2D laser displacement sensors. It can reduce labour cost, save time and cost on installation and maintenance, ensure workers' safety and provide real-time alerts by warning calls, emails, SMS, or other forms of instant messages such as loudspeaker alarm system.
    Digitalisation 3D Reality Simulation / Data Management
    (CDE-related)
    PA20-125 Bentley Systems Hong Kong Limited
    Tel: 2802 1030
    Synchro Pro
    SYNCHRO Pro is an advanced construction project management software in 4D environment. The platform provides a fully integrated CPM scheduling engine with interoperable CAD capabilities that enables the users to create, edit, analyze and track multiple project views side- by-side in one 4D visual interface.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Video
    Sensors and IoT Concrete Strength Maturity and Site Environment Data Sensor PA20-126 AOMS Technologies
    https://www.aoms-tech.com/
    LumiCon End-to-End IoT Solutions for Smart Construction Sites
    This product is a cloud-based IoT sensor management and monitoring platform by using LoRa (Short for Long Range)-enabled sensor for concreting, site environmental and asset data by using various sensor units such as 1) Concrete strength and maturity, 2) Site environmental conditions (such as temperature, relative humidity, harmful gases concentration level, air quality, pressure, noise, lightning, and water leakage detection) 3) Asset and material management such as tools, machinery, assets, precast elements by tracking and asset utilization analysis using GPS and accelerometers. as well as FOS solution that is designed for permanent strain monitoring embedded in the concrete.
    Digitalisation Project Management Software
    (DWSS-related)
    PA20-127 Contech Point Company Limited
    Tel: 3990 1990
    Construction Information Anywhere (CIA)
    This product is a web-based online data management platform and mobile APP for construction workflow including Request for Information (RFI) and drawings and document submission etc.. It standardizes and centralizes project workflows and documentation management. This platform could provide certain functions as a Digital Work Supervision System (DWSS) such as inspection form.

    (Note: This product has certain DWSS functions which the vendor shall be inquired for details.)
    Product Information
    Video
    Digitalisation Project Management Software
    (DWSS-related)
    PA20-128 Varadise Limited
    Tel: 2312 6880
    Varadise DWSS
    Varadise DWSS is a cloud-based project management platform with web portal and web app, designed to optimize workflows in construction. The 5 core modules allow site supervisory staff to standardize approval workflow, customize forms and automate reporting. The system also supports 4D BIM integration and synchronize with Varadise Twin platform as an optional add-on.

    (Note: This product has certain DWSS functions which the vendor shall be inquired for details.)
    Video
    Advanced Tools and Equipment Lifting Crane PA20-129 Tai Chung Hydraulic Eng. Co. Ltd.
    Tel: 2443 5592
    F.lli Ferrari Hydraulic Truck Mounted Crane
    Model: 990
    This truck-mounted lifting crane which consists of full-time enabled safe load indicator complies with EN 12999 standard. The Stability Control System enables real-time sensing and indication of the Safe Working Load (SWL) for different outrigger extension conditions.

    Legend: 15
    Product Information
    Video
    Advanced Tools and Equipment Laser Scanner PA20-130 BuiltInfo Company Limited
    Tel: 3565 5212
    Trimble X7 3D Laser Scanner
    Trimble X7 is a compact size 3D Laser Scanner with Trimble T10 tablet for laser scanning with colour imagery that provides innovative features including: 1) Automatic calibration, 2) Automatic leveling, 3) Inertial Measurement Unit (IMU)-based automatic registration and 4) High sensitivity scanning mode. This laser scanner could only be compatible with Trimble T10 Tablet.
    Advanced Tools and Equipment Drone PA20-131 Data Oasis Limited
    Tel: 6461 1208
    Parrot Anafi
    Models.: Thermal / USA This product is a compact-size and lightweight Unmanned Aerial Vehicle (UAV) with dual cameras built-in: 1) Infrared (IR) thermal camera and 2) RGB camera for building inspections and IR thermographic survey. This product integrates Unmanned Aerial Vehicle (UAV) with infrared (IR) thermal and visual cameras for building inspections to detect debonded tiles or plaster and water leakage, etc

    Advanced Tools and Equipment Lifting Sling PA20-132 Mak Kee International HK Ltd.
    Tel: 2396 4107
    Slingmax
    This product is a synthetic lifting sling with a maximum working load up to 227 tonnes. It has 3 safety features namely 1) 'Check Fast' Inspection System, 2) Fiber Optic Inspection, and 3) Rifled Cover Technology

    Legend: 15
    Video
    Digitalisation 3D Reality Simulation / Data Management
    (CDE-related)
    PA20-133 Digital G Limited
    Tel: 9202 5335
    Revizto
    This is a cloud-based real-time BIM-based project data visual collaboration platform for architects, engineers and contractors to communicate their design within project team in a navigable 3D environment. Using gaming technology and cloud solutions, this software can bring together various BIM/CAD data and workflow for collaboration and issue tracking in one centralized and interactive 3D environment.
    This platform works as a complementary tool alongside a CDE platform and which could extend the access to the construction database for future Facility Management purpose.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Product Information
    Video
    Advanced Tools and Equipment Lifting Crane PA20-134 Houston Machinery (China) Co. Ltd
    Tel: 2241 9627
    Kato Rough Terrain Crane
    Model: SL700R
    KATO (SL-700R) Rough Terrain Crane is suitable for use in special working conditions, such as narrow work site and access road requiring lifting condition to greater height. The Automatic Crane System with voice alarm (ACS), a computer monitoring system, can control the main boom, fly jib or outrigger to prevent human input errors. The ACS can automatically calculate and display the Safe Working Load (SWL) at different strokes of outriggers, and the main boom, fly jib at different angles on a real-time basis to enhance safety.

    Legend: 15
    Product Information
    Automation and Robotics Transportation Machine PA20-135 B-free Technology Limited
    Tel: 3704 7069
    Haulerbot
    This product is a remote-controlled and electrically-powered vehicle that facilitiates construction workers to transport objects in all-terrain including staircase.

    Legend: 14, 15
    Product Information
    Video
    Digitalisation 3D Reality Simulation / Data Management
    (CDE-related)
    PA20-136 Global Virtual Design and Construction Limited
    Tel: 3199 0388
    EcoDomus
    Integrated Platform - EcoDomus brings together a host of software for easy gathering and aggregation of information as it is a highly flexible system. Because of this, the platform can provide accurate information and actionable insights that are appropriate for your needs. Scalable Solution EcoDomus is a scalable software suite. It can adapt to support the Internet of Things and Big Data solutions. As such, you can enhance your data collection from a broader range of information sources. Site-Based Work - EcoDomus empowers your ambulatory workforce, as the software has mobile and web interfaces that support on-site working. With this, your mobile employees can be productive and can access data relevant to them to help them make intelligent decisions. Best Practices Implementation - To ensure that your assets are profitable for a long time, you have to be certain that your employees and partners observe best practices when it comes to your facilities. EcoDomus enables you to make sure of that by providing you with the related information on one window. EcoDomus can also acts as the Common Data Environment (CDE) and Integrated Web Services BIM Hub, tying together various disconnected systems and workflows, and enables handover between all the participants in building's lifecycle: architects, engineers, contractors, operators, managers, commissioning agents, etc.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Digitalisation 3D Reality Simulation / Data Management
    (CDE-related)
    PA20-137 CivilConnect Limited
    Tel: 2628 0933
    Trimble Connect Business Premium (TRCBP-C-R12)
    Open-BIM Cloud-based Collaboration platform and Tekla Workflow Tools that connects and enables Owners, Architects, Engineers, Contractors, Detailers and Fabricators to communicate and work together efficiently throughout whole project lifecycle with up-to-date Constructible Model and project information through a Common Data Environment and 4 Device Platforms ( Mobile, Desktop, Web and Mixed Reality)
    Provides Information synchronisation & notification, Clash detection, Design & Constructibility Reviews, Revision Management, Activity History, Request for Action/Information and Workflow Tools for Construction & Supply Chain activity and Status update and Sharing.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Digitalisation 3D Reality Simulation / Data Management
    (CDE-related)
    PA20-138 MES Digital Limited
    Tel: 3188 5230
    ShareBIM
    Model Integration includes: Sectioning, Measurement, Walkthrough, Component Filtering, Component Search, Viewing Properties, Viewpoint Management.

    Data Management (CDE) Document Management Collaboration Management includes Engineering Issue Management, Engineering Issue Pushpin, Project Activities, Task Management.

    Quality Management, Safety Management, Progress Management, Workflow Management, Material Management, QR Code

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Automation and Robotics Automatic Control System for Excavator PA21-001 Topcon Beijing (H.K.) Limited
    Tel: 2690 1328
    TOPCON 3DMC X53x Indicate Control System
    The product is a 2D / 3D indicate control system on excavators to allow operators to conduct excavation by applying 3D and real-time comparison of site condition to the design drawings. It can be installed in different brands and models of excavators which maximizes it application.
    The product could allow operators to work in bad site visibility that enhances productivity and quality of operation.
    Product Information
    Video
    Digitalisation Project Management Software
    (DWSS-related)
    PA21-002 Hong Kong Smart City Technology Company Limtied
    Tel: 9256 6684
    Pre-cast Component Inspection Online System
    This product is a cloud based mobile APP platform specially designed for precast concrete component inspection and quality checking including 1) online precast component status checking, 2) online site supervision workflow and record (quality check) and 3) review workflow and documents through mobile APP on a real- time basis.

    (Note: This product has certain DWSS functions which the vendor shall be inquired for details.)


    Product Information
    Video
    Digitalisation 3D Reality Simulation / Data Management
    (CDE-related)
    PA21-003 Forida Limited
    Tel: 2412 4590
    dRofus (version 2.5)
    This product is a CDE, Project Information Management (PIM) and collaboration system which provides Room data and Furniture, Fixture and Equipment (FFE) management tools to enable the input of user requirements for data-driven design and access to a common BIM-based database for collaboration throughout the project life cycle.
    Advanced Tools and Equipment Lifting Crane PA21-004 SOHO Mechanical Engineering Company Limited
    Tel: 6565 0686
    Italy Comprehensive Loader Crane
    Model nos:PM150SP, PM58526SP, PM58529SP, PM65029SP, PM100029SP
    This truck mounted crane, equipped with Stability Control System, consists of a full-time enabled safe load indicator. It can continuously monitor and indicate the Safe Working Load at different outrigger extensions or load lifting conditions of the crane on a real-time basis.

    Legend: 15
    Product Information
    Advanced Tools and Equipment Position Surveying Tool PA21-005 Strobus (Far East) Limited
    Tel: 2690 3773
    Nilamtec T3F Multi-Band High Precision GNSS Tablet
    The Nilamtec T3F is a handheld device with GNSS positioning capability connected to professional external GNSS antenna to provide high precision for surveying work.
    Product Information
    Video
    Digitalisation 3D Reality Simulation / Data Management PA21-006 MyBIM Ltd
    Tel: 2806 2699
    Agisoft Metashape
    This product is a photogrammetry software for post-processing for digital images to covert into dense 3D point clouds, textured polygonal models, orthomosaics, Digital Surface Models (DSM) and Digital Terrain Models (DTM) with spatial data for GIS application, site visualisation and indirect measurement. This product allows for fast processing, providing at the same time highly accurate results.
    Advanced Tools and Equipment Lifting Crane PA21-007 Sanyo Motors
    Tel: 2390 0433
    Copma hydraulic truck-mounted crane
    Model nos.: 1150.8J6, 1150.10, 2000.9, 820.8, 950.9, 510.8, 650.8, 510.6, 650.6, 360.4 ,360.6
    This hydraulic truck-mounted crane, equipped with Stability Control System, can continuously monitor and indicate the Safe Working Load at different outrigger extensions or load lifting conditions of the crane on a real-time basis.

    Legend: 15
    Product Information
    Advanced Tools and Equipment Digital Leveller PA21-008 MyBIM Ltd
    Tel: 2806 2699
    SATLAB SDL1 Digital Level
    This product is a digital level to replace manual level surveying work by workers. It is easy to operate by using a single button only and provides faster and more accurate height and distance measurement for construction works.
    Digitalisation 3D Reality Simulation / Data Management PA21-009 Hongpin Information Technology (Shanghai) Co.,Ltd
    http://www.honlitech.com/
    InfiPoints
    The product is an one-stop point cloud processing software which integrates data processing, modelling, and data analysis functions, thus avoiding format conversion and data loss.
    Video
    Sensors and IoT Concrete Strength Maturity Sensor PA21-010 The Transtec Group Products, LLC
    https://www.commandcenterconcrete.com
    COMMAND Center Concrete Temperature and Maturity Monitoring System
    A concrete maturity monitoring system that measures and logs concrete temperature history, calculates maturity and evaluates in-place strength.
    Advanced Tools and Equipment Positioning and Tilt Surveying Tool PA21-011 MyBIM Ltd
    Tel: 2806 2699
    SatLab SL900 GNSS Receiver
    A lightweight RTK capable GNSS receiver used to transmit real-time GPS data to any device over Bluetooth connection.
    Sensors and IoT Movement Sensors PA21-012 Hi-Target International Group Limited
    Tel: 3188 8923
    High-Precision Monitoring Solution
    The product is a GNSS solution designed to provide automated and continuous deformation monitoring where up-to-date positioning data is shown on the software platform.
    Product Information
    Video
    Automation and Robotics Automatic water-spraying dust control system PA21-013 Novox Limited
    Tel: 2690 9881
    iSmartBuild Auto Sprinkler Control System
    An automatic water spraying dust control system designed to remotely control water sprinklers to spray water to suppress dust pollution according to air quality. Dust sensors placed at various control points monitor the site's real-time dust levels.
    A main control unit triggered by the dust sensors (Pre-approved item no. PA19-044 iSmartBuild Real-time Monitoring System) operates the solenoid valves which turn on/off the water sprinklers.

    Legend: 14
    Advanced Tools and Equipment Laser Scanner PA21-014 BuiltInfo Company Limited
    Tel: 3565 5212
    LiBackpack DGC50
    A portable multi-sensor and integrated scanning system. It consists of a horizontal and vertical LiDAR sensor, a panoramic camera and a GNSS module to capture georeferenced images and 3D point cloud data.
    Product Information
    Video
    Advanced Construction Material Backfilling Material PA21-015 Golik Concrete Limited / Minji Limited / Vast Hill Development Limited
    Tel: 2634 1818 / 9144 3497 / 6377 1213
    Self-Compacting Backfill Material
    This is a self-levelling, free flowing, soil like backfill material which can be pumped into required areas without the need for layer-by-layer compaction. The mixing of the product can be carried out either on- or off-site.

    Legend: 14
    Product Information
    Video
    Digitalisation Project Management Software
    (DWSS-related)
    PA21-016 Cerebro Strategy Limited
    Tel: 2272 3670
    Cerebro Inspection
    The product is a project management software for the management of inspections and work progress under four inspection catergories namely Site, Quality, Environmental and Safety. A cloud platform stores all relevant data and offers multi-project management capability.

    (Note: This product has certain DWSS functions which the vendor shall be inquired for details.)
    Product Information
    Video
    Advanced Tools and Equipment Laser Scanner PA21-017 Star Vision Limited
    Tel: 2897 0975
    Emesent Hovermap
    The product is a mobile SLAM-based (Simultaneous Localisation and Mapping) LiDAR mapper which can be handheld or mounted to a UAV (not included) for underground and vertical asset inspections. It comes with Autonomy Level 2 (AL2) software designed for autonomous flight in GPS-denied environments and omidirectional collision avoidance.
    Product Information
    Video
    Digitalisation AI Inspection software PA21-018 RaSpect Intelligence Inspection Limited
    Tel: 3594 6600
    RaSpect AI Cloud Engine (RaSpect-ACE)
    RaSpect-Inspectica is an online platform for building inspection management. It allows project team to store the related documents on the system and perform A.I. analysis on captured data.
    User is able to access & manage data via online platform.

    Legend: 14
    Product Information
    Video
    Advanced Tools and Equipment Sonar Surveying System PA21-019 Neptune 22 Equipment & Technical Services Limited
    Tel: 2338 8187
    Norbit - iWBMS (WaveMaster II)
    The Norbit system is a high resolution multi-beam echo sounding (MBES) system fitted to manned or unmanned survey vessel for the surveying of marine structures.

    It enables a remote inspection of coastal infrastructures. The captured survey data (Point Cloud) can be used to create 3D structural modelling for coastal engineering design and planning through Civil BIM software.
    Product Information
    Video
    Advanced Tools and Equipment Acoustic camera PA21-020 PD Technologies Limited
    Tel: 3695 0998
    BATCAM2.0 Ultrasonic Sound Camera
    The product is an ultrasonic and acoustic sound camera for locating gas leakage, electric faults and mechanical issues. Real-time visulisation of sound help to identify various industrial conditions. The sound imagery allows the user to pinpoint both audible and ultrasonic noises that are hard to detect.

    Legend: 15
    Product Information
    Video
    Advanced Tools and Equipment Ground Penetrating Radar PA21-021 PD Technologies Limited
    Tel: 3695 0998
    Proceq GS8000
    The product is capable of subsurface detection and mapping with Stepped Frequency Continuous Wave (SFCW) ground penetrating radar technology for non-destructive testing.
    Product Information
    Video
    Advanced Tools and Equipment Exoskeleton PA21-022 Hilti (Hong Kong) Limited
    Tel: 8228 8118
    EXO-01
    The product is a wearable non‐battery powered upper body exoskeleton focused on overhead applications. The exoskeleton applies a force to the wearer's arms to support overhead work.

    Legend: 15
    Product Information
    Video
    Movement sensor (settlement) Force, Underground Water Level, Inclination, and Environmental Monitoring Platform PA21-023 TRE Altamira Srl
    https://site.tre-altamira.com/
    SqueeSAR - An Advanced Interferometric Synthetic Aperture Radar (InSAR) Algorithm
    A geodetic method which uses InSAR technology for remote ground and long period infrastructure settlement monitoring. All changes in land surface altitudes are displayed on a web platform.
    Product Information
    Video
    Digitalisation Fire Safety Monitoring System PA21-024 Letsapp Limited
    Tel: 5225 4679
    FireWatcher Fire Alarm Web Application
    The product is a cloud‐based fire alarm system monitoring platform which alerts users of occurences of fire and/or smoke through mobile application.

    Legend: 15
    Product Information
    Video
    Advanced Tools and Equipment Laser Scanner PA21-025 Delta Pyramax Engineering Limited
    Tel: 2511 2118
    NavVis VLX
    NavVis VLX is a wearable indoor mobile mapping system that enables high‐quality capture of both point clouds and imagery in one scan.
    Product Information
    Video
    Advanced Tools and Equipment Positioning and Tilt Surveying Tool PA21-026 D-Reality Consultancy Limited
    Tel: 5625 2312
    iRTK5 GNSS RTK System (Base or Rover set)
    The product is a Global Navigation Satellite System GNSS RTK positioning and tilt surveying system with a built-in calibration-free inertial measurement unit (IMU) and a high-quality scalable GNSS receiver for precise position data from GNSS.
    Product Information
    Video
    Advanced Tools and Equipment Positioning and Tilt Surveying Tool PA21-027 Leica Geosystems Limited
    Tel: 2161 3880
    Leica GS18 I
    This product is an hand-held positioning surveying tool with 3D scanning function by means of Visual Positioning technology utilising Global Navigation Satellite System (GNSS), inertial measurement unit (IMU) and a camera which captures the images of surrounding environment. The tool accurately records the scanned positions and provides post-survey measurements from the captured images.
    Sensors and IoT Electrical Power Consumption Monitoring System PA21-028 Verdigris Technologies Inc. Taiwan Branch
    https://verdigris.co/
    Buildings intelligent energy monitoring system
    This product is a non-intrusive electricity meter for the detection of irregularity in electricity power consumption and visual reports are provided for further engergy consumption analysis.

    Legend: 15
    Advanced Construction Material Concrete Slab Substituting Material PA21-029 Advanced & Sustainable Technologies Limited
    Tel: 6751 5571
    BubbleDeck
    Model : BD 340 (Type 1 cast in situ & Type 2 semi-precast)
    The product is a lightweight biaxial prefabricated slab system incorporating recycled hollow plastic spheres in the slab. The system is designed to reduce the use of concrete and rebar in slab and speed up floor construction cycles.
    Advanced Construction Material Advanced Flexible Sprinkler Dropper Pipe System PA21-030 Victaulic Company
    https://www.victaulic.com/
    Victaulic® VicFlex™ Sprinkler Fittings Braided Flexible Hose with Bracket
    (AH2 flexible hose and bracket type AB1, AB2, AB4, AB5, AB7, AB11, AB12 and ABBA)
    The product is a fire sprinkler fitting that allows sprinkler installation on suspended ceilings utilising a flexible stainless steel hose and steel bracket.

    Note: Fire Services Department (FSD)'s case-by-case approval shall be sought.
    Sensors and IoT Safety Monitoring System PA21-031 Transcendence Company Limited
    Tel: 2862 1724
    Driver Status Monitor System
    The product is designed to analyse machine operator's behaviour via an infra-red camera. The captured images are interpreted by artifical intelligence (A.I.) and big data to recognise unsafe and abnormal behaviours. An instant alert will be issued to both the driver and site management when unwanted operator behaviour is spotted.

    Legend: 15
    Sensors and IoT Electrical Power Consumption Monitoring System PA21-032 Transcendence Company Limited
    Tel: 2862 1724
    Intelligent Electrical System
    The product assists management staff in the remote monitoring of a construction site's power usage. Both a web portal and mobile app show real-time power consumption figures and reports electrical supply related data to help technicans identify faults in the electrical system.

    Legend: 15
    Video
    Digitalisation Project Management Software
    (DWSS-related)
    PA21-033 MES Services Limited
    Tel: 2180 6144
    DWSS Version 1
    The product is a Digital Works Supervision System (DWSS), which is a web-based centralised portal for the digitisation of various construction workflows and collection of construction works data.(Note: This product is CDE-related platform which the vendor shall be inquired for details.)

    Legend: 14
    Advanced Tools and Equipment Drone PA21-034 LWCEC Technologies Limited / Dronesurvey Asia
    Tel: 3158 0762 / 3725 4890
    ELIOS 2 internal and confined space inspection drone
    This product is an inspection drone designed for site supervision and inspections of underground and confined spaces. Full HD-live streaming under GPS-free flying with distance lock is available. It is equipped with a 4k camera, a thermal camera, and dustproof-lighting, lighting of 10k lumen.
    Automation and Robotics Transportation Machine PA21-035 O-matic Intelligent Robot Limited
    Tel: 3705 2998
    Universal Service Vehicle 3.0
    The product is a wireless remote-controlled battery-operated Universal Service Vehicle (USV) capable of onsite transportation of materials/ tools.

    Legend: 15
    Automation and Robotics Drill Rig PA21-036 Epiroc Hong Kong Limited
    Tel: 2488 0103
    Diamec Smart 8
    This product is a core drilling rig for automatic deep-hole exploration drilling which can be operated by less experienced drillers. With the safety control panel and the automatic 'Rod Handling System', the driller can operate the machine and handle the rods from a distance which improves safety.

    Legend: 15
    Sensors and IoT Vibration and Tilting Monitoring System PA21-037 MyBIM Limited
    Tel: 2806 2699
    6600D Bluetooth Wireless Tiltmeter
    This product is a tiltmeter with wireless transmission capability and an acceleration sensor to monitor change in vertical and horizontal rotations of buildings and structures.
    Advanced Tools and Equipment Intelligent Hearing Protection Device PA21-038 Digital G Limited
    Tel: 9202 5335
    Focuslite Ear-Defender
    The product is an over-ear hearing protection device with hear-through technology and noise reduction capability through monitoring of both exposed and enviromental noises. The collected individual and environmental noise level data can be viewed on the online platform. The user can communicate and remain aware of events nearby by hearing a controlled level of surrounding noises.

    Legend: 15
    Digitalisation Safety Risk Assessment Software PA21-039 Ideas & Technology Company Limited
    Tel: 9313 6043
    Risk Assessment Conduct Everywhere (RACE) Mobile App
    This is a mobile app for onsite safety-related staff to carry our risk assessment effectively and share relevant information to the electronic platform with the project team.

    Legend: 14, 15
    Video
    Automation and Robotics Excavator Attachment PA21-040 BAUER Equipment HK Limited
    Tel: 2544 9613
    Klemm hydraulic handling attachment type
    Model: HBR120-E2V-350
    The product is a hydraulic/ mechanic handling system for casings and drill rods as an attachment kit for excavators of over 5 tonne in weight.

    Legend: 15
    Advanced Tools and Equipment Concealed Services Scanner PA21-041 Leica Geosystems Limited
    Tel: 2161 3880
    C-thrue
    This product is a concealed services and rebar scanner designed to locate and identify rebars, voids, cavities, conduits and other objects embedded in concrete structure prior to drilling or cutting works. It has dual antenna polarisation to enable the detection of the bottom layer of rebars deep inside the concrete to improve accuracy. Its automatic position and navigation system reduces human errors associated with incorrect positioning. Scanned results can be visualized in 3D model format in the display and Augmented Reality mode.
    Product Information
    Video
    Advanced Tools and Equipment Laser Scanner PA21-042 Master Builders Solutions Hong Kong Limited
    Tel: 2408 4442
    Geokrete 2.0
    Geokret 2.0 is the complete solution for shotcrete thickness scanning in underground environments aimed at improving the performance of shotcrete applications. This system increases safety and durability, avoids unnecessary costs due to wastage of material and ensures the best spray quality possible.
    Automation and Robotics Demolition Robot PA21-043 O-matic Intelligent Robot Limited
    Tel: 3705 2998
    Jackbot
    This product is a programmable battery-operated demolition and chiseling robot with remote control. When non-transparent objects entering within 2m radius of the robot, the robot will stop working automatically for safety reason. It can also work for 8 hours after 4 hours of charging time.

    Legend: 15
    Product Information
    Video
    Sensors and IoT Safety Monitoring System PA21-044 GreenSafety Technology Limited
    Tel: 2662 6460
    Package A: Advanced Driving Assistance System (ADAS) + Drowsiness Monitoring System (DMS)
    Package B: Advanced Driving Assistance System (ADAS)
    Package C: Drowsiness Monitoring System (DMS)


    Advanced Driving Assistance System (ADAS) is a dual-camera device that provides real-time driving assistance by alerting the driver of possible dangerous driving situations. The detection is made possible with the use of video analytics technology.

    Driver Monitoring System (DMS) uses sophisticated face recognition technology to provide audiable and vibrating alerts when fatigue or bad driving behavior is detected.

    Legend: 15
    Digitalisation 3D Reality Simulation / Data Management
    (CDE-related)
    PA22-001 Glodon (Hong Kong) Software Limited
    Tel: 2333 7560
    Gwork
    Gwork is a cloud-based collaboration platform that allows different parties to share BIM models and drawings, manage variation orders (VO's), approve modifications and circulate various types of documents. The platform maintains close connection between the office and the construction site through the sharing of the most up-to-date project information and progress.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Advanced Tools and Equipment Lighting equipment PA22-002 Milwaukee Tool (Asia) of Techtronic Asia Company Limited
    Tel: 8101 0100
    M18 LED Remote Stand Light
    Model: M18 ONERSAL-0
    A compact battery-powered by LED light stand that can provide illumination to various terrains with its foldable three-legged design and weather resistant capabilility.
    Digitalisation 3D Reality Simulation / Data Management
    (CDE-related)
    PA22-003 isBIM Limited
    Tel: 2382 8380
    Jarvis Eagle Eye - Digital Twin Platform for Site Management
    A platform that offers a web-based digital twins representation of building assets and processes throughout the lifecycle of a project. The database is used for site checks, work progress updates and communcation between project teams.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)
    Automation and Robotics Paint Spraying Robot PA22-004 O-Matic Intelligent Robot Limited
    Tel: 3705 2998
    Paintbot (adjustable)
    This product is a remote-controlled and programmable paint spraying robot equipped with 12-axis robotic arm mounted on universal service vehicle (USV). It is suitable for wall or ceiling painting. When non-transparent objects entering within 1m radius of the robot, the USV will automatically stop moving for safety reason.

    Legend: 15
    Sensors and IoT Safety Monitoring System PA22-005 iSafety Limited
    Tel: 2408 8008
    A.I. Surveillance System for Construction Site Safety
    A safety management system incorporating artificial intelligence (A.I) and 5G Internet of Things (IoT) technologies. It can provide real-time monitoring and issue instant warnings. Supervisory staff members can receive real-time alert notifications for timely response.

    Legend: 15
    Automation and Robotics Welding Robot PA22-006 Karmo International Company Limited
    Tel: 2362 4843
    Robotic Welding System
    The system uses automation technology to perform welding work which reduces manual labour and human injuries therefore improving the overall safety of welding. It also enchances productivity by speeding up the entire welding process.

    Legend: 14
    Digitalisation 3D Reality Simulation / Data Management
    (CDE-related)
    PA22-007 Llewellyn and Partners Company Limited
    Email: info@lpchku.com
    AutoCDE
    An ISO-compliant integrated asset information management platform that incorporates Artificial Intelligence (A.I.) technology.
    Over a Common Data Environment (CDE), the platform provides a single source of Building Information Modelling (BIM), Geographic Information System (GIS) and Internet of Things (IoT).
    High-value geometry and information of the built assets can be extracted and utilised for informed decisions to achieve smart operation.
    The platoform's AutoBIM feature can create ISO-compliant BIM models from CAD drawings through the patented AI technologies.

    (Note: This product is CDE-related platform which the vendor shall be inquired for details.)

    Legend: 14
    Digitalisation Project Management Software
    (DWSS-related)
    PA22-008 Bex Solutions Limited
    Tel: 3469 9699
    ESIA (DWSS)
    A Digital Works Supervision System (DWSS) that digitises inspection and site monitoring processes likes RISC management, Site Diary, Safety and Cleansing Inspection and keeping of Labor Return record.
    (Note: This product has certain DWSS functions which the vendor shall be inquired for details.)
    Digitalisation Rebar processing software PA22-009 Digital Construction Solutions Ltd.
    https://hkdigitalconstruct.com/Contact
    SteelPac collection (4 nos. software)
    1) SteelPac RCD - AutoCAD based rebar detailing application
    2) SteelPac RCS - Rebar bending scheduling
    3) SteelPac Cloud - Project Management & Control via Cloud & App
    4) SteelPac ERP – Rebar production system for suppliers

    A set of 4 software for rebar design, generation of bar bending schedules, rebar project management and production functionalities.
    Advanced Construction Material Rebar Coupler PA22-010 Dextra Pacific Ltd.
    Tel: 2511 8236
    Groutec
    This product is a Buildings Department approved coupler for the connection of a steel rebar in precast concrete and a starter bar.
    Sensors and IoT Safety Monitoring System PA22-011 RaSpect Intelligence Inspection Limited
    https://raspect.ai/en/about/contact-us
    Raspect-ACE-Safety
    This product is a platform aimed at monitoring onsite activities and equipment to improve safety. Sensors and cameras on site allows computer analysis on the collected data for the detection and alert of dangerous situations. The analyzed data is shown on a web dashboard with alerts for timely response.

    Legend: 14, 15
    Advanced tools and equipment Hand-held Core Drill PA22-012 Milwaukee Tool (Asia) of Techtronic Asia Company Limited
    Tel: 8101 0100
    Li-Ion Battery Powered Handheld Diamond Core Drill
    Model: MXF DCD150
    The product is a cordless battery-powered handheld core drill with two drill speed modes to optimise the drilling speed based on the desired hole sizes upto 152mm (6 inches) diameter. 'The product is a cordless battery-powered handheld core drill with two drill speed modes to optimise the drilling speed based on the desired hole size.
    Digitalisation 3D Reality Simulation / Data Management PA22-013 OpenSpace Construction Technology (HK) Limited
    support@openspace.ai /info@openspace.ai
    OpenSpace Capture
    This product is a digitalisation software with AI technology to turn raw video data into a complete, easy-to navigate “Street View” of a job site, with minimal manual effort. Field teams can simply strap a 360 camera on a hardhat and walk around the site to capture the site work progress.
    Digitalisation 3D Reality Simulation / Data Management PA22-014 OpenSpace Construction Technology (HK) Limited
    support@openspace.ai /info@openspace.ai
    OpenSpace ClearSight
    This product turns 360 images into actionable data and dashboards by automatically tracking and quantifying work-in-place for key trades and project milestones.
    Automation and Robotics Automatic Bar Bending Machine PA22-015 Hop Shing Machinery Factory
    Tel: 2448 4267
    Automatic Bar Bending Machine
    Model: HS-SC16
    This product is an automatic bar bending machine which is able to perform bar bending and cutting works according to rebar detail. Advantages of the product over traditional way includes: (i) Redundant works are done automatically; (ii) Productivity and quality standard are improved.

    Legend: 14
    Advanced Tools and Equipment Hand-held Breaker PA22-016 Milwaukee Tool (Asia) of Techtronic Asia Company Limited
    Tel: 8101 0100
    MX Fuel 28mm HEX Demolition Breaker
    Model: MXF DH2528H-0G0
    The product is a light-weight lithium battery-powered cordless demolition breaker with high impact energy. The battery pack has an overload protection that ptotects it from being overloaded and helps to ensure long life. Under extreme stress, the battery electronics turns off the product automatically.
    Advanced Tools and Equipment Wall Saw Machine PA22-017 Milwaukee Tool (Asia) of Techtronic Asia Company Limited
    Tel: 8101 0100
    MX FUEL 350mm Cut Off Saw
    Model: MXF COS350-0G0
    This product is a cordless cut-off saw designed for instant starts and zero gas emmisions. A full 350mm capacity gives the user the ability to cut up to 125mm depths in a large variety of materials.

(Updated on 24 May 2022)

 

For more Safety-related Technologies

 

 

How to search:

Method 1: Step 1: Key in a keyword in the "Magnifier" row, e.g. CDE or DWSS
Step 2: Click the "Search" button

OR

Method 2: Step 1: Click the drop-down menu in the second row
Step 2: Choose the category you would like to search, e.g. IoT
Step 3: Click the "Search" button

 

 

Remarks:

(A) Legend of Skill Level

1. Awareness Course; 2. Skill Training - Basic Level; 3. Skill Training - Intermediate/Advanced Level; 4. Management Level; and 5. CIC-Accredited BIM Manager Course.

 

(B) Legend of Discipline

1. Architecture; 2. Structure; 3. Building Services/MEP; 4. Civil/Infrastructure Works; 5. Collaboration/(Construction) Programming; 6. Point Cloud/Scanning to BIM/Land Surveying; 7. "BIM/Information/Data Audit" or Management; 8. Quantity Surveying/Costing; 9. Construction; 10. Asset/Facility Management; 11. Sustainability; 12. Scripting/Coding (for Automation); 13. Object/Families Development; 14. Locally developed innovations or products; and 15. Safety-related Technologies

 

DISCLAIMER: All information set out in the Pre-approved Lists of the Construction Innovation and Technology Fund (CITF) is provided to the Construction Industry Council by third party suppliers or service providers on the Pre-approved Lists of their own accord and no part of the information has been checked or verified by the Construction Industry Council. Advice from the training/product providers shall always be sought for product enquiries. The Pre-approved Lists are prepared for reference purposes only and are not intended for marketing or advertising purposes. CITF applicants may submit their CITF applications by selecting one or more items of the BIM software, BIM training courses or Technologies set out in the Pre-approved Lists. CITF applicants must note that there is no guarantee that any application would be approved under the CITF. All applications will be reviewed and approved by the CITF Vetting Sub-Committee on an individual basis. Decisions by the Construction Industry Council on the applications are final and are not subject to appeal.

  • About CITF
  • Background
  • Chairman Message
  • Governance
  • Steering Commttee
  • Management Commttee
  • Vetting Sub-Commttee
  • Fund video
  • Funding Scope
  • Technology Adoption
  • Building Information Modelling (BIM)
  • Advanced Construction Technologies (ACT)
  • Modular Integrated Construction (MiC)
  • Prefabricated Steel Rebar
  • Funding Scope
  • Manpower Development
  • Non-local Enrichment Courses for Students
  • Non-local Training / Visits for Practitioners
  • International Conferences in Hong Kong
  • Local Collaborative Courses
  • Pre-approved List
  • Application to the Pre-approved List
  • BIM Software
  • BIM Training Course
  • Technologies
  • Terms and Conditions
  • Events & Updates
  • Event List
  • Contact us
  • Copyright © 2022 Construction Innovation and Technology Fund. All Rights Reserved

  • Website designed by Vwonwon Creation